tor-dev June 2014

tor-dev@lists.torproject.org

51 participants
70 discussions

(Draft) Proposal 224: Next-Generation Hidden Services in Tor
by Nick Mathewson 28 May '15

28 May '15

Hi, all! I've been trying to fill in all the cracks and corners for a revamp of the hidden services protocol, based on earlier writings by George Kadianakis and other discussions on the mailing list. (See draft acknowledgments section below.) After a bunch of comments, I'm ready to give this a number and call it (draft) proposal 224. I'd like to know what doesn't make sense, what I need to explain better, and what I need to design better. I'd like to fill in the gaps and turn this into a more full document. I'd like to answer the open questions. Comments are most welcome, especially if they grow into improvements. FWIW, I am likely to be offline for most of the current weekend, because of Thanksgiving, so please be patient with my reply speed; I hope to catch up with emails next week. Filename: 224-rend-spec-ng.txt Title: Next-Generation Hidden Services in Tor Author: Nick Mathewson Created: 2013-11-29 Status: Draft -1. Draft notes This document describes a proposed design and specification for hidden services in Tor version 0.2.5.x or later. It's a replacement for the current rend-spec.txt, rewritten for clarity and for improved design. Look for the string "TODO" below: it describes gaps or uncertainties in the design. Change history: 2013-11-29: Proposal first numbered. Some TODO and XXX items remain. 0. Hidden services: overview and preliminaries. Hidden services aim to provide responder anonymity for bidirectional stream-based communication on the Tor network. Unlike regular Tor connections, where the connection initiator receives anonymity but the responder does not, hidden services attempt to provide bidirectional anonymity. Other features include: * [TODO: WRITE ME once there have been some more drafts and we know what the summary should say.] Participants: Operator -- A person running a hidden service Host, "Server" -- The Tor software run by the operator to provide a hidden service. User -- A person contacting a hidden service. Client -- The Tor software running on the User's computer Hidden Service Directory (HSDir) -- A Tor node that hosts signed statements from hidden service hosts so that users can make contact with them. Introduction Point -- A Tor node that accepts connection requests for hidden services and anonymously relays those requests to the hidden service. Rendezvous Point -- A Tor node to which clients and servers connect and which relays traffic between them. 0.1. Improvements over previous versions. [TODO write me once there have been more drafts and we know what the summary should say.] 0.2. Notation and vocabulary Unless specified otherwise, all multi-octet integers are big-endian. We write sequences of bytes in two ways: 1. A sequence of two-digit hexadecimal values in square brackets, as in [AB AD 1D EA]. 2. A string of characters enclosed in quotes, as in "Hello". These characters in these string are encoded in their ascii representations; strings are NOT nul-terminated unless explicitly described as NUL terminated. We use the words "byte" and "octet" interchangeably. We use the vertical bar | to denote concatenation. We use INT_N(val) to denote the network (big-endian) encoding of the unsigned integer "val" in N bytes. For example, INT_4(1337) is [00 00 05 39]. 0.3. Cryptographic building blocks This specification uses the following cryptographic building blocks: * A stream cipher STREAM(iv, k) where iv is a nonce of length S_IV_LEN bytes and k is a key of length S_KEY_LEN bytes. * A public key signature system SIGN_KEYGEN()->seckey, pubkey; SIGN_SIGN(seckey,msg)->sig; and SIGN_CHECK(pubkey, sig, msg) -> { "OK", "BAD" }; where secret keys are of length SIGN_SECKEY_LEN bytes, public keys are of length SIGN_PUBKEY_LEN bytes, and signatures are of length SIGN_SIG_LEN bytes. This signature system must also support key blinding operations as discussed in appendix [KEYBLIND] and in section [SUBCRED]: SIGN_BLIND_SECKEY(seckey, blind)->seckey2 and SIGN_BLIND_PUBKEY(pubkey, blind)->pubkey2 . * A public key agreement system "PK", providing PK_KEYGEN()->seckey, pubkey; PK_VALID(pubkey) -> {"OK", "BAD"}; and PK_HANDHAKE(seckey, pubkey)->output; where secret keys are of length PK_SECKEY_LEN bytes, public keys are of length PK_PUBKEY_LEN bytes, and the handshake produces outputs of length PK_OUTPUT_LEN bytes. * A cryptographic hash function H(d), which should be preimage and collision resistant. It produces hashes of length HASH_LEN bytes. * A cryptographic message authentication code MAC(key,msg) that produces outputs of length MAC_LEN bytes. * A key derivation function KDF(key data, salt, personalization, n) that outputs n bytes. As a first pass, I suggest: * Instantiate STREAM with AES128-CTR. [TODO: or ChaCha20?] * Instantiate SIGN with Ed25519 and the blinding protocol in [KEYBLIND]. * Instantiate PK with Curve25519. * Instantiate H with SHA256. [TODO: really?] * Instantiate MAC with HMAC using H. * Instantiate KDF with HKDF using H. For legacy purposes, we specify compatibility with older versions of the Tor introduction point and rendezvous point protocols. These used RSA1024, DH1024, AES128, and SHA1, as discussed in rend-spec.txt. Except as noted, all RSA keys MUST have exponent values of 65537. As in [proposal 220], all signatures are generated not over strings themselves, but over those strings prefixed with a distinguishing value. 0.4. Protocol building blocks [BUILDING-BLOCKS] In sections below, we need to transmit the locations and identities of Tor nodes. We do so in the link identification format used by EXTEND2 cells in the Tor protocol. NSPEC (Number of link specifiers) [1 byte] NSPEC times: LSTYPE (Link specifier type) [1 byte] LSLEN (Link specifier length) [1 byte] LSPEC (Link specifier) [LSLEN bytes] Link specifier types are as described in tor-spec.txt. Every set of link specifiers MUST include at minimum specifiers of type [00] (TLS-over-TCP, IPv4) and [02] (legacy node identity). We also incorporate Tor's circuit extension handshakes, as used in the CREATE2 and CREATED2 cells described in tor-spec.txt. In these handshakes, a client who knows a public key for a server sends a message and receives a message from that server. Once the exchange is done, the two parties have a shared set of forward-secure key material, and the client knows that nobody else shares that key material unless they control the secret key corresponding to the server's public key. 0.5. Assigned relay cell types These relay cell types are reserved for use in the hidden service protocol. 32 -- RELAY_COMMAND_ESTABLISH_INTRO Sent from hidden service host to introduction point; establishes introduction point. Discussed in [REG_INTRO_POINT]. 33 -- RELAY_COMMAND_ESTABLISH_RENDEZVOUS Sent from client to rendezvous point; creates rendezvous point. Discussed in [EST_REND_POINT]. 34 -- RELAY_COMMAND_INTRODUCE1 Sent from client to introduction point; requests introduction. Discussed in [SEND_INTRO1] 35 -- RELAY_COMMAND_INTRODUCE2 Sent from client to introduction point; requests introduction. Same format as INTRODUCE1. Discussed in [FMT_INTRO1] and [PROCESS_INTRO2] 36 -- RELAY_COMMAND_RENDEZVOUS1 Sent from introduction point to rendezvous point; attempts to join introduction point's circuit to client's circuit. Discussed in [JOIN_REND] 37 -- RELAY_COMMAND_RENDEZVOUS2 Sent from introduction point to rendezvous point; reports join of introduction point's circuit to client's circuit. Discussed in [JOIN_REND] 38 -- RELAY_COMMAND_INTRO_ESTABLISHED Sent from introduction point to hidden service host; reports status of attempt to establish introduction point. Discussed in [INTRO_ESTABLISHED] 39 -- RELAY_COMMAND_RENDEZVOUS_ESTABLISHED Sent from rendezvous point to client; acknowledges receipt of ESTABLISH_RENDEZVOUS cell. Discussed in [EST_REND_POINT] 40 -- RELAY_COMMAND_INTRODUCE_ACK Sent form introduction point to client; acknowledges receipt of INTRODUCE1 cell and reports success/failure. Discussed in [INTRO_ACK] 0.5. Acknowledgments [TODO reformat these once the lists are more complete.] This design includes ideas from many people, including Christopher Baines, Daniel J. Bernstein, Matthew Finkel, Ian Goldberg, George Kadianakis, Aniket Kate, Tanja Lange, Robert Ransom, It's based on Tor's original hidden service design by Roger Dingledine, Nick Mathewson, and Paul Syverson, and on improvements to that design over the years by people including Tobias Kamm, Thomas Lauterbach, Karsten Loesing, Alessandro Preite Martinez, Robert Ransom, Ferdinand Rieger, Christoph Weingarten, Christian Wilms, We wouldn't be able to do any of this work without good attack designs from researchers including Alex Biryukov, Lasse Øverlier, Ivan Pustogarov, Paul Syverson Ralf-Philipp Weinmann, See [ATTACK-REFS] for their papers. Several of these ideas have come from conversations with Christian Grothoff, Brian Warner, Zooko Wilcox-O'Hearn, And if this document makes any sense at all, it's thanks to editing help from Matthew Finkel George Kadianakis, Peter Palfrader, [XXX Acknowledge the huge bunch of people working on 8106.] [XXX Acknowledge the huge bunch of people working on 8244.] Please forgive me if I've missed you; please forgive me if I've misunderstood your best ideas here too. 1. Protocol overview In this section, we outline the hidden service protocol. This section omits some details in the name of simplicity; those are given more fully below, when we specify the protocol in more detail. 1.1. View from 10,000 feet A hidden service host prepares to offer a hidden service by choosing several Tor nodes to serve as its introduction points. It builds circuits to those nodes, and tells them to forward introduction requests to it using those circuits. Once introduction points have been picked, the host builds a set of documents called "hidden service descriptors" (or just "descriptors" for short) and uploads them to a set of HSDir nodes. These documents list the hidden service's current introduction points and describe how to make contact with the hidden service. When a client wants to connect to a hidden service, it first chooses a Tor node at random to be its "rendezvous point" and builds a circuit to that rendezvous point. If the client does not have an up-to-date descriptor for the service, it contacts an appropriate HSDir and requests such a descriptor. The client then builds an anonymous circuit to one of the hidden service's introduction points listed in its descriptor, and gives the introduction point an introduction request to pass to the hidden service. This introduction request includes the target rendezvous point and the first part of a cryptographic handshake. Upon receiving the introduction request, the hidden service host makes an anonymous circuit to the rendezvous point and completes the cryptographic handshake. The rendezvous point connects the two circuits, and the cryptographic handshake gives the two parties a shared key and proves to the client that it is indeed talking to the hidden service. Once the two circuits are joined, the client can send Tor RELAY cells to the server. RELAY_BEGIN cells open streams to an external process or processes configured by the server; RELAY_DATA cells are used to communicate data on those streams, and so forth. 1.2. In more detail: naming hidden services [NAMING] A hidden service's name is its long term master identity key. This is encoded as a hostname by encoding the entire key in Base 32, and adding the string ".onion" at the end. (This is a change from older versions of the hidden service protocol, where we used an 80-bit truncated SHA1 hash of a 1024 bit RSA key.) The names in this format are distinct from earlier names because of their length. An older name might look like: unlikelynamefora.onion yyhws9optuwiwsns.onion And a new name following this specification might look like: a1uik0w1gmfq3i5ievxdm9ceu27e88g6o7pe0rffdw9jmntwkdsd.onion Note that since master keys are 32 bytes long, and 52 bytes of base 32 encoding can hold 260 bits of information, we have four unused bits in each of these names. [TODO: Alternatively, we could require that the first bit of the master key always be zero, and use a 51-byte encoding. Or we could require that the first two bits be zero, and use a 51-byte encoding and reserve the first bit. Or we could require that the first nine bits, or ten bits be zero, etc.] 1.3. In more detail: Access control [IMD:AC] Access control for a hidden service is imposed at multiple points through the process above. In order to download a descriptor, clients must know which blinded signing key was used to sign it. (See the next section for more info on key blinding.) This blinded signing key is derived from the service's public key and, optionally, an additional secret that is not part of the hidden service's onion address. The public key and this secret together constitute the service's "credential". When the secret is in use, the hidden service gains protections equivalent to the "stealth mode" in previous designs. To learn the introduction points, the clients must decrypt the body of the hidden service descriptor. The encryption key for these is derived from the service's credential. In order to make an introduction point send a request to the server, the client must know the introduction point and know the service's per-introduction-point authentication key from the hidden service descriptor. The final level of access control happens at the server itself, which may decide to respond or not respond to the client's request depending on the contents of the request. The protocol is extensible at this point: at a minimum, the server requires that the client demonstrate knowledge od the contents of the encrypted portion of the hidden service descriptor. The service may additionally require a user- or group-specific access token before it responds to requests. 1.4. In more detail: Distributing hidden service descriptors. [IMD:DIST] Periodically, hidden service descriptors become stored at different locations to prevent a single directory or small set of directories from becoming a good DoS target for removing a hidden service. For each period, the Tor directory authorities agree upon a collaboratively generated random value. (See section 2.3 for a description of how to incorporate this value into the voting practice; generating the value is described in other proposals, including [TODO: add a reference]) That value, combined with hidden service directories' public identity keys, determines each HSDirs' position in the hash ring for descriptors made in that period. Each hidden service's descriptors are placed into the ring in positions based on the key that was used to sign them. Note that hidden service descriptors are not signed with the services' public keys directly. Instead, we use a key-blinding system [KEYBLIND] to create a new key-of-the-day for each hidden service. Any client that knows the hidden service's credential can derive these blinded signing keys for a given period. It should be impossible to derive the blinded signing key lacking that credential. The body of each descriptor is also encrypted with a key derived from the credential. To avoid a "thundering herd" problem where every service generates and uploads a new descriptor at the start of each period, each descriptor comes online at a time during the period that depends on its blinded signing key. The keys for the last period remain valid until the new keys come online. 1.5. In more detail: Scaling to multiple hosts [THIS SECTION IS UNFINISHED] In order to allow multiple hosts to provide a single hidden service, I'm considering two options. * We can have each server build an introduction circuit to each introduction point, and have the introduction points responsible for round-robining between these circuits. One service host is responsible for picking the introduction points and publishing the descriptors. * We can have servers choose their introduction points independently, and build circuits to them. One service host is responsible for combining these introduction points into a single descriptor. If we want to avoid having a single "master" host without which the whole service goes down (the "one service host" in the description above), we need a way to fail over from one host to another. We also need a way to coordinate between the hosts. This is as yet undesigned. Maybe it should use a hidden service? See [SCALING-REFS] for discussion on this topic. [TODO: Finalize this design.] 1.6. In more detail: Backward compatibility with older hidden service protocols This design is incompatible with the clients, server, and hsdir node protocols from older versions of the hidden service protocol as described in rend-spec.txt. On the other hand, it is designed to enable the use of older Tor nodes as rendezvous points and introduction points. 1.7. In more detail: Offline operation In this design, a hidden service's secret identity key may be stored offline. It's used only to generate blinded identity keys, which are used to sign descriptor signing keys. In order to operate a hidden service, the operator can generate a number of descriptor signing keys and their certifications (see [DESC-OUTER] and [ENCRYPTED-DATA] below), and their corresponding descriptor encryption keys, and export those to the hidden service hosts. 1.8. In more detail: Encryption Keys And Replay Resistance To avoid replays of an introduction request by an introduction point, a hidden service host must never accept the same request twice. Earlier versions of the hidden service design used a authenticated timestamp here, but including a view of the current time can create a problematic fingerprint. (See proposal 222 for more discussion.) 1.9. In more detail: A menagerie of keys [In the text below, an "encryption keypair" is roughly "a keypair you can do Diffie-Hellman with" and a "signing keypair" is roughly "a keypair you can do ECDSA with."] Public/private keypairs defined in this document: Master (hidden service) identity key -- A master signing keypair used as the identity for a hidden service. This key is not used on its own to sign anything; it is only used to generate blinded signing keys as described in [KEYBLIND] and [SUBCRED]. Blinded signing key -- A keypair derived from the identity key, used to sign descriptor signing keys. Changes periodically for each service. Clients who know a 'credential' consisting of the service's public identity key and an optional secret can derive the public blinded identity key for a service. This key is used as an index in the DHT-like structure of the directory system. Descriptor signing key -- A key used to sign hidden service descriptors. This is signed by blinded signing keys. Unlike blinded signing keys and master identity keys, the secret part of this key must be stored online by hidden service hosts. Introduction point authentication key -- A short-term signing keypair used to identify a hidden service to a given introduction point. A fresh keypair is made for each introduction point; these are used to sign the request that a hidden service host makes when establishing an introduction point, so that clients who know the public component of this key can get their introduction requests sent to the right service. No keypair is ever used with more than one introduction point. (previously called a "service key" in rend-spec.txt) Introduction point encryption key -- A short-term encryption keypair used when establishing connections via an introduction point. Plays a role analogous to Tor nodes' onion keys. A fresh keypair is made for each introduction point. Symmetric keys defined in this document: Descriptor encryption keys -- A symmetric encryption key used to encrypt the body of hidden service descriptors. Derived from the current period and the hidden service credential. Public/private keypairs defined elsewhere: Onion key -- Short-term encryption keypair (Node) identity key Symmetric key-like things defined elsewhere: KH from circuit handshake -- An unpredictable value derived as part of the Tor circuit extension handshake, used to tie a request to a particular circuit. 2. Generating and publishing hidden service descriptors [HSDIR] Hidden service descriptors follow the same metaformat as other Tor directory objects. They are published anonymously to Tor servers with the HSDir3 flag. (Authorities should assign this flag as they currently assign the HSDir flag, except that they should restrict it to Tor versions implementing the HSDir parts of this specification.) 2.1. Deriving blinded keys and subcredentials [SUBCRED] In each time period (see [TIME-PERIOD] for a definition of time periods), a hidden service host uses a different blinded private key to sign its directory information, and clients use a different blinded public key as the index for fetching that information. For a candidate for a key derivation method, see Appendix [KEYBLIND]. Additionally, clients and hosts derive a subcredential for each period. Knowledge of the subcredential is needed to decrypt hidden service descriptors for each period and to authenticate with the hidden service host in the introduction process. Unlike the credential, it changes each period. Knowing the subcredential, even in combination with the blinded private key, does not enable the hidden service host to derive the main credential--therefore, it is safe to put the subcredential on the hidden service host while leaving the hidden service's private key offline. The subcredential for a period is derived as: H("subcredential" | credential | blinded-public-key). 2.2. Locating, uploading, and downloading hidden service descriptors [HASHRING] To avoid attacks where a hidden service's descriptor is easily targeted for censorship, we store them at different directories over time, and use shared random values to prevent those directories from being predictable far in advance. Which Tor servers hosts a hidden service depends on: * the current time period, * the daily subcredential, * the hidden service directories' public keys, * a shared random value that changes in each time period, * a set of network-wide networkstatus consensus parameters. Below we explain in more detail. 2.2.1. Dividing time into periods [TIME-PERIODS] To prevent a single set of hidden service directory from becoming a target by adversaries looking to permanently censor a hidden service, hidden service descriptors are uploaded to different locations that change over time. The length of a "time period" is controlled by the consensus parameter 'hsdir-interval', and is a number of minutes between 30 and 14400 (10 days). The default time period length is 1500 (one day plus one hour). Time periods start with the Unix epoch (Jan 1, 1970), and are computed by taking the number of whole minutes since the epoch and dividing by the time period. So if the current time is 2013-11-12 13:44:32 UTC, making the seconds since the epoch 1384281872, the number of minutes since the epoch is 23071364. If the current time period length is 1500 (the default), then the current time period number is 15380. It began 15380*1500*60 seconds after the epoch at 2013-11-11 20:00:00 UTC, and will end at (15380+1)*1500*60 seconds after the epoch at 2013-11-12 21:00:00 UTC. 2.2.2. Overlapping time periods to avoid thundering herds [TIME-OVERLAP] If every hidden service host were to generate a new set of keys and upload a new descriptor at exactly the start of each time period, the directories would be overwhelmed by every host uploading at the same time. Instead, each public key becomes valid at its new location at a deterministic time somewhat _before_ the period begins, depending on the public key and the period. The time at which a key might first become valid is determined by the consensus parameter "hsdir-overlap-begins", which is an integer in range [1,100] with default value 80. This parameter denotes a percentage of the interval for which no overlap occurs. So for the default interval (1500 minutes) and default overlap-begins value (80%), new keys do not become valid for the first 1200 minutes of the interval. The new shared random value must be published *before* the start of the next overlap interval by at least enough time to ensure that clients all get it. [TODO: how much earlier?] The time at which a key from the next interval becomes valid is determined by taking the first two bytes of OFFSET = H(Key | INT_8(Next_Period_Num)) as a big-endian integer, dividing by 65536, and treating that as a fraction of the overlap interval. For example, if the period is 1500 minutes long, and overlap interval is 300 minutes long, and OFFSET begins with [90 50], then the next key becomes valid at 1200 + 300 * (0x9050 / 65536) minutes, or approximately 22 hours and 49 minutes after the beginning of the period. Hidden service directories should accept descriptors at least [TODO: how much?] minutes before they would become valid, and retain them for at least [TODO: how much?] minutes after the end of the period. When a client is looking for a service, it must calculate its key both for the current and for the subsequent period, to decide whether the next period's key is valid yet. 2.2.3. Where to publish a service descriptor The following consensus parameters control where a hidden service descriptor is stored; hsdir_n_replicas = an integer in range [1,16] with default value 2. hsdir_spread_fetch = an integer in range [1,128] with default value 3. hsdir_spread_store = an integer in range [1,128] with default value 3. hsdir_spread_accept = an integer in range [1,128] with default value 8. To determine where a given hidden service descriptor will be stored in a given period, after the blinded public key for that period is derived, the uploading or downloading party calculate for replicanum in 1...hsdir_n_replicas: hs_index(replicanum) = H("store-at-idx" | blinded_public_key | replicanum | periodnum) where blinded_public_key is specified in section KEYBLIND, and periodnum is defined in section TIME-PERIODS. where n_replicas is determined by the consensus parameter "hsdir_n_replicas". Then, for each node listed in the current consensus with the HSDir3 flag, we compute a directory index for that node as: hsdir_index(node) = H(node_identity_digest | shared_random | INT_8(period_num) ) where shared_random is the shared value generated by the authorities in section PUB-SHAREDRANDOM. Finally, for replicanum in 1...hsdir_n_replicas, the hidden service host uploads descriptors to the first hsdir_spread_store nodes whose indices immediately follow hs_index(replicanum). When choosing an HSDir to download from, clients choose randomly from among the first hsdir_spread_fetch nodes after the indices. (Note that, in order to make the system better tolerate disappearing HSDirs, hsdir_spread_fetch may be less than hsdir_spread_store.) An HSDir should rejects a descriptor if that HSDir is not one of the first hsdir_spread_accept HSDirs for that node. [TODO: Incorporate the findings from proposal 143 here. But watch out: proposal 143 did not analyze how much the set of nodes changes over time, or how much client and host knowledge might diverge.] 2.2.4. URLs for anonymous uploading and downloading Hidden service descriptors conforming to this specification are uploaded with an HTTP POST request to the URL /tor/rendezvous3/publish relative to the hidden service directory's root, and downloaded with an HTTP GET request for the URL /tor/rendezvous3/<z> where z is a base-64 encoding of the hidden service's blinded public key. [TODO: raw base64 is not super-nice for URLs, since it can have slashes. We already use it for microdescriptor URLs, though. Do we care here?] These requests must be made anonymously, on circuits not used for anything else. 2.3. Publishing shared random values [PUB-SHAREDRANDOM] Our design for limiting the predictability of HSDir upload locations relies on a shared random value that isn't predictable in advance or too influenceable by an attacker. The authorities must run a protocol to generate such a value at least once per hsdir period. Here we describe how they publish these values; the procedure they use to generate them can change independently of the rest of this specification. For one possible (somewhat broken) protocol, see Appendix [SHAREDRANDOM]. We add a new line in votes and consensus documents: "hsdir-shared-random" PERIOD-START VALUE PERIOD-START = YYYY-MM-DD HH:MM:SS VALUE = A base-64 encoded 256-bit value. To decide which hsdir-shared-random line to include in a consensus for a given PERIOD-START, we choose whichever line appears verbatim in the most votes, so long as it is listed by at least three authorities. Ties are broken in favor of the lower value. More than one PERIOD-START is allowed per vote, and per consensus. The same PERIOD-START must not appear twice in a vote or in a consensus. [TODO: Need to define a more robust algorithm. Need to cover cases where multiple cluster of authorities publish a different value, etc.] The hs-dir-shared-random lines appear, sorted by PERIOD-START, in the consensus immediately after the "params" line. The authorities should publish the shared random value for the current period, and, at a time at least three voting periods before the overlap interval begins, the shared random value for the next period. [TODO: find out what weasel doesn't like here.] 2.4. Hidden service descriptors: outer wrapper [DESC-OUTER] The format for a hidden service descriptor is as follows, using the meta-format from dir-spec.txt. "hs-descriptor" SP "3" SP public-key SP certification NL [At start, exactly once.] public-key is the blinded public key for the service, encoded in base 64. Certification is a certification of a short-term ed25519 descriptor signing key using the public key, in the format of proposal 220. "time-period" SP YYYY-MM-DD HH:MM:SS NUM NL [Exactly once.] The time period for which this descriptor is relevant, including its starting time and its period number. "revision-counter" SP Integer NL [Exactly once.] The revision number of the descriptor. If an HSDir receives a second descriptor for a key that it already has a descriptor for, it should retain and serve the descriptor with the higher revision-counter. (Checking for monotonically increasing revision-counter values prevents an attacker from replacing a newer descriptor signed by a given key with a copy of an older version.) "encrypted" NL encrypted-string [Exactly once.] An encrypted blob, whose format is discussed in [ENCRYPTED-DATA] below. The blob is base-64 encoded and enclosed in -----BEGIN MESSAGE---- and ----END MESSAGE---- wrappers. "signature" SP signature NL [exactly once, at end.] A signature of all previous fields, using the signing key in the hs-descriptor line. We use a separate key for signing, so that the hidden service host does not need to have its private blinded key online. 2.5. Hidden service descriptors: encryption format [ENCRYPTED-DATA] The encrypted part of the hidden service descriptor is encrypted and authenticated with symmetric keys generated as follows: salt = 16 random bytes secret_input = nonce | blinded_public_key | subcredential | INT_4(revision_counter) keys = KDF(secret_input, salt, "hsdir-encrypted-data", S_KEY_LEN + S_IV_LEN + MAC_KEY_LEN) SECRET_KEY = first S_KEY_LEN bytes of keys SECRET_IV = next S_IV_LEN bytes of keys MAC_KEY = last MAC_KEY_LEN bytes of keys The encrypted data has the format: SALT (random bytes from above) [16 bytes] ENCRYPTED The plaintext encrypted with S [variable] MAC MAC of both above fields [32 bytes] The encryption format is ENCRYPTED = STREAM(SECRET_IV,SECRET_KEY) xor Plaintext Before encryption, the plaintext must be padded to a multiple of ??? bytes with NUL bytes. The plaintext must not be longer than ??? bytes. [TODO: how much? Should this be a parameter? What values in practice is needed to hide how many intro points we have, and how many might be legacy ones?] The plaintext format is: "create2-formats" SP formats NL [Exactly once] A space-separated list of integers denoting CREATE2 cell format numbers that the server recognizes. Must include at least TAP and ntor as described in tor-spec.txt. See tor-spec section 5.1 for a list of recognized handshake types. "authentication-required" SP types NL [At most once] A space-separated list of authentication types. A client that does not support at least one of these authentication types will not be able to contact the host. Recognized types are: 'password' and 'ed25519'. See [INTRO-AUTH] below. At least once: "introduction-point" SP link-specifiers NL [Exactly once per introduction point at start of introduction point section] The link-specifiers is a base64 encoding of a link specifier block in the format described in BUILDING-BLOCKS. "auth-key" SP "ed25519" SP key SP certification NL [Exactly once per introduction point] Base-64 encoded introduction point authentication key that was used to establish introduction point circuit, cross-certifying the blinded public key key using the certification format of proposal 220. "enc-key" SP "ntor" SP key NL [At most once per introduction point] Base64-encoded curve25519 key used to encrypt request to hidden service. [TODO: I'd like to have a cross-certification here too.] "enc-key" SP "legacy" NL key NL [At most once per introduction point] Base64-encoded RSA key, wrapped in "----BEGIN RSA PUBLIC KEY-----" armor, for use with a legacy introduction point as described in [LEGACY_EST_INTRO] and [LEGACY-INTRODUCE1] below. Exactly one of the "enc-key ntor" and "enc-key legacy" elements must be present for each introduction point. [TODO: I'd like to have a cross-certification here too.] Other encryption and authentication key formats are allowed; clients should ignore ones they do not recognize. 3. The introduction protocol The introduction protocol proceeds in three steps. First, a hidden service host builds an anonymous circuit to a Tor node and registers that circuit as an introduction point. [Between these steps, the hidden service publishes its introduction points and associated keys, and the client fetches them as described in section [HSDIR] above.] Second, a client builds an anonymous circuit to the introduction point, and sends an introduction request. Third, the introduction point relays the introduction request along the introduction circuit to the hidden service host, and acknowledges the introduction request to the client. 3.1. Registering an introduction point [REG_INTRO_POINT] 3.1.1. Extensible ESTABLISH_INTRO protocol. [EST_INTRO] When a hidden service is establishing a new introduction point, it sends a ESTABLISH_INTRO cell with the following contents: AUTH_KEY_TYPE [1 byte] AUTH_KEY_LEN [1 byte] AUTH_KEY [AUTH_KEY_LEN bytes] Any number of times: EXT_FIELD_TYPE [1 byte] EXT_FIELD_LEN [1 byte] EXT_FIELD [EXTRA_FIELD_LEN bytes] ZERO [1 byte] HANDSHAKE_AUTH [MAC_LEN bytes] SIGLEN [1 byte] SIG [SIGLEN bytes] The AUTH_KEY_TYPE field indicates the type of the introduction point authentication key and the type of the MAC to use in for HANDSHAKE_AUTH. Recognized types are: [00, 01] -- Reserved for legacy introduction cells; see [LEGACY_EST_INTRO below] [02] -- Ed25519; HMAC-SHA256. [FF] -- Reserved for maintenance messages on existing circuits; see MAINT_INTRO below. [TODO: Should this just be a new relay cell type? Matthew and George think so.] The AUTH_KEY_LEN field determines the length of the AUTH_KEY field. The AUTH_KEY field contains the public introduction point authentication key. The EXT_FIELD_TYPE, EXT_FIELD_LEN, EXT_FIELD entries are reserved for future extensions to the introduction protocol. Extensions with unrecognized EXT_FIELD_TYPE values must be ignored. The ZERO field contains the byte zero; it marks the end of the extension fields. The HANDSHAKE_AUTH field contains the MAC of all earlier fields in the cell using as its key the shared per-circuit material ("KH") generated during the circuit extension protocol; see tor-spec.txt section 5.2, "Setting circuit keys". It prevents replays of ESTABLISH_INTRO cells. SIGLEN is the length of the signature. SIG is a signature, using AUTH_KEY, of all contents of the cell, up to but not including SIG. These contents are prefixed with the string "Tor establish-intro cell v1". Upon receiving an ESTABLISH_INTRO cell, a Tor node first decodes the key and the signature, and checks the signature. The node must reject the ESTABLISH_INTRO cell and destroy the circuit in these cases: * If the key type is unrecognized * If the key is ill-formatted * If the signature is incorrect * If the HANDSHAKE_AUTH value is incorrect * If the circuit is already a rendezvous circuit. * If the circuit is already an introduction circuit. [TODO: some scalability designs fail there.] * If the key is already in use by another circuit. Otherwise, the node must associate the key with the circuit, for use later in INTRODUCE1 cells. [TODO: The above will work fine with what we do today, but it will do quite badly if we ever freak out and want to go back to RSA2048 or bigger. Do we care?] 3.1.2. Registering an introduction point on a legacy Tor node [LEGACY_EST_INTRO] Tor nodes should also support an older version of the ESTABLISH_INTRO cell, first documented in rend-spec.txt. New hidden service hosts must use this format when establishing introduction points at older Tor nodes that do not support the format above in [EST_INTRO]. In this older protocol, an ESTABLISH_INTRO cell contains: KEY_LENGTH [2 bytes] KEY [KEY_LENGTH bytes] HANDSHAKE_AUTH [20 bytes] SIG [variable, up to end of relay payload] The KEY_LENGTH variable determines the length of the KEY field. The KEY field is a ASN1-encoded RSA public key. The HANDSHAKE_AUTH field contains the SHA1 digest of (KH | "INTRODUCE"). The SIG field contains an RSA signature, using PKCS1 padding, of all earlier fields. Note that since the relay payload itself may be no more than 498 bytes long, the KEY_LENGTH field can never have a first byte other than [00] or [01]. These values are used to distinguish legacy ESTABLISH_INTRO cells from newer ones. Older versions of Tor always use a 1024-bit RSA key for these introduction authentication keys. Newer hidden services MAY use RSA keys up 1904 bits. Any more than that will not fit in a RELAY cell payload. 3.1.3. Managing introduction circuits [MAINT_INTRO] If the first byte of an ESTABLISH_INTRO cell is [FF], the cell's body contains an administrative command for the circuit. The format of such a command is: Any number of times: SUBCOMMAND_TYPE [2 bytes] SUBCOMMAND_LEN [2 bytes] SUBCOMMAND [COMMAND_LEN bytes] Recognized SUBCOMMAND_TYPE values are: [00 01] -- update encryption keys [TODO: Matthew says, "This can be used to fork an intro point to balance traffic over multiple hidden service servers while maintaining the criteria for a valid ESTABLISH_INTRO cell. -MF". Investigate.] Unrecognized SUBCOMMAND_TYPE values should be ignored. 3.1.3.1. Updating encryption keys (subcommand 0001) [UPDATE-KEYS-SUBCMD] Hidden service hosts send this subcommand to set their initial encryption keys or update the configured public encryption keys associated with this circuit. This message must be sent after establishing an introduction point, before the circuit can be advertised. These keys are given in the form: NUMKEYS [1 byte] NUMKEYS times: KEYTYPE [1 byte] KEYLEN [1 byte] KEY [KEYLEN bytes] COUNTER [4 bytes] SIGLEN [1 byte] SIGNATURE [SIGLEN bytes.] The KEYTYPE value [01] is for Curve25519 keys. The COUNTER field is a monotonically increasing value across a given introduction point authentication key. The SIGNATURE must be generated with the introduction point authentication key, and must cover the entire subcommand body, prefixed with the string "Tor hidden service introduction encryption keys v1". [TODO: Nothing is done here to prove ownership of the encryption keys. Does that matter?] [TODO: The point here is to allow encryption keys to change while maintaining an introduction point and not forcing a client to download a new descriptor. I'm not sure if that's worth it. It makes clients who have seen a key before distinguishable from ones who have not.] [Matthew says: "Repeat-client over long periods of time will always be distinguishable. It may be better to simply expire intro points than try to preserve forward-secrecy, though". Must find out what he meant.] Setting the encryption keys for a given circuit replaces the previous keys for that circuit. Clients who attempt to connect using the old key receive an INTRO_ACK cell with error code [00 02] as described in section [INTRO_ACK] below. 3.1.4. Acknowledging establishment of introduction point [INTRO_ESTABLISHED] After setting up an introduction circuit, the introduction point reports its status back to the hidden service host with an empty INTRO_ESTABLISHED cell. [TODO: make this cell type extensible. It should be able to include data if that turns out to be needed.] 3.2. Sending an INTRODUCE1 cell to the introduction point. [SEND_INTRO1] In order to participate in the introduction protocol, a client must know the following: * An introduction point for a service. * The introduction authentication key for that introduction point. * The introduction encryption key for that introduction point. The client sends an INTRODUCE1 cell to the introduction point, containing an identifier for the service, an identifier for the encryption key that the client intends to use, and an opaque blob to be relayed to the hidden service host. In reply, the introduction point sends an INTRODUCE_ACK cell back to the client, either informing it that its request has been delivered, or that its request will not succeed. 3.2.1. INTRODUCE1 cell format [FMT_INTRO1] An INTRODUCE1 cell has the following contents: AUTH_KEYID [32 bytes] ENC_KEYID [8 bytes] Any number of times: EXT_FIELD_TYPE [1 byte] EXT_FIELD_LEN [1 byte] EXT_FIELD [EXTRA_FIELD_LEN bytes] ZERO [1 byte] ENCRYPTED [Up to end of relay payload] [TODO: Should we have a field to determine the type of ENCRYPTED, or should we instead assume that there is exactly one encryption key per encryption method? The latter is probably safer.] Upon receiving an INTRODUCE1 cell, the introduction point checks whether AUTH_KEYID and ENC_KEYID match a configured introduction point authentication key and introduction point encryption key. If they do, the cell is relayed; if not, it is not. The AUTH_KEYID for an Ed25519 public key is the public key itself. The ENC_KEYID for a Curve25519 public key is the first 8 bytes of the public key. (This key ID is safe to truncate, since all the keys are generated by the hidden service host, and the ID is only valid relative to a single AUTH_KEYID.) The ENCRYPTED field is as described in 3.3 below. To relay an INTRODUCE1 cell, the introduction point sends an INTRODUCE2 cell with exactly the same contents. 3.2.2. INTRODUCE_ACK cell format. [INTRO_ACK] An INTRODUCE_ACK cell has the following fields: STATUS [2 bytes] Any number of times: EXT_FIELD_TYPE [1 byte] EXT_FIELD_LEN [1 byte] EXT_FIELD [EXTRA_FIELD_LEN bytes] Recognized status values are: [00 00] -- Success: cell relayed to hidden service host. [00 01] -- Failure: service ID not recognzied [00 02] -- Failure: key ID not recognized [00 03] -- Bad message format Recognized extension field types: [00 01] -- signed set of encryption keys The extension field type 0001 is a signed set of encryption keys; its body matches the body of the key update command in [UPDATE-KEYS-CMD]. Whenever sending status [00 02], the introduction point MUST send this extension field. 3.2.3. Legacy formats [LEGACY-INTRODUCE1] When the ESTABLISH_INTRO cell format of [LEGACY_EST_INTRO] is used, INTRODUCE1 cells are of the form: AUTH_KEYID_HASH [20 bytes] ENC_KEYID [8 bytes] Any number of times: EXT_FIELD_TYPE [1 byte] EXT_FIELD_LEN [1 byte] EXT_FIELD [EXTRA_FIELD_LEN bytes] ZERO [1 byte] ENCRYPTED [Up to end of relay payload] Here, AUTH_KEYID_HASH is the hash of the introduction point authentication key used to establish the introduction. Because of limitations in older versions of Tor, the relay payload size for these INTRODUCE1 cells must always be at least 246 bytes, or they will be rejected as invalid. 3.3. Processing an INTRODUCE2 cell at the hidden service. [PROCESS_INTRO2] Upon receiving an INTRODUCE2 cell, the hidden service host checks whether the AUTH_KEYID/AUTH_KEYID_HASH field and the ENC_KEYID fields are as expected, and match the configured authentication and encryption key(s) on that circuit. The service host then checks whether it has received a cell with these contents before. If it has, it silently drops it as a replay. (It must maintain a replay cache for as long as it accepts cells with the same encryption key.) If the cell is not a replay, it decrypts the ENCRYPTED field, establishes a shared key with the client, and authenticates the whole contents of the cell as having been unmodified since they left the client. There may be multiple ways of decrypting the ENCRYTPED field, depending on the chosen type of the encryption key. Requirements for an introduction handshake protocol are described in [INTRO-HANDSHAKE-REQS]. We specify one below in section [NTOR-WITH-EXTRA-DATA]. The decrypted plaintext must have the form: REND_TOKEN [20 bytes] Any number of times: EXT_FIELD_TYPE [1 byte] EXT_FIELD_LEN [1 byte] EXT_FIELD [EXTRA_FIELD_LEN bytes] ZERO [1 byte] ONION_KEY_TYPE [2 bytes] ONION_KEY [depends on ONION_KEY_TYPE] NSPEC (Number of link specifiers) [1 byte] NSPEC times: LSTYPE (Link specifier type) [1 byte] LSLEN (Link specifier length) [1 byte] LSPEC (Link specifier) [LSLEN bytes] PAD (optional padding) [up to end of plaintext] Upon processing this plaintext, the hidden service makes sure that any required authentication is present in the extension fields, and then extends a rendezvous circuit to the node described in the LSPEC fields, using the ONION_KEY to complete the extension. As mentioned in [BUILDING-BLOCKS], the "TLS-over-TCP, IPv4" and "Legacy node identity" specifiers must be present. The hidden service SHOULD NOT reject any LSTYPE fields which it doesn't recognize; instead, it should use them verbatim in its EXTEND request to the rendezvous point. The ONION_KEY_TYPE field is one of: [01] TAP-RSA-1024: ONION_KEY is 128 bytes long. [02] NTOR: ONION_KEY is 32 bytes long. The ONION_KEY field describes the onion key that must be used when extending to the rendezvous point. It must be of a type listed as supported in the hidden service descriptor. Upon receiving a well-formed INTRODUCE2 cell, the hidden service host will have: * The information needed to connect to the client's chosen rendezvous point. * The second half of a handshake to authenticate and establish a shared key with the hidden service client. * A set of shared keys to use for end-to-end encryption. 3.3.1. Introduction handshake encryption requirements [INTRO-HANDSHAKE-REQS] When decoding the encrypted information in an INTRODUCE2 cell, a hidden service host must be able to: * Decrypt additional information included in the INTRODUCE2 cell, to include the rendezvous token and the information needed to extend to the rendezvous point. * Establish a set of shared keys for use with the client. * Authenticate that the cell has not been modified since the client generated it. Note that the old TAP-derived protocol of the previous hidden service design achieved the first two requirements, but not the third. 3.3.2. Example encryption handshake: ntor with extra data [NTOR-WITH-EXTRA-DATA] This is a variant of the ntor handshake (see tor-spec.txt, section 5.1.4; see proposal 216; and see "Anonymity and one-way authentication in key-exchange protocols" by Goldberg, Stebila, and Ustaoglu). It behaves the same as the ntor handshake, except that, in addition to negotiating forward secure keys, it also provides a means for encrypting non-forward-secure data to the server (in this case, to the hidden service host) as part of the handshake. Notation here is as in section 5.1.4 of tor-spec.txt, which defines the ntor handshake. The PROTOID for this variant is "hidden-service-ntor-curve25519-sha256-1". Define the tweak value t_hsenc, and the tag value m_hsexpand as: t_hsenc = PROTOID | ":hs_key_extract" m_hsexpand = PROTOID | ":hs_key_expand" To make an INTRODUCE cell, the client must know a public encryption key B for the hidden service on this introduction circuit. The client generates a single-use keypair: x,X = KEYGEN() and computes: secret_hs_input = EXP(B,x) | AUTH_KEYID | X | B | PROTOID info = m_hsexpand | subcredential hs_keys = HKDF(secret_hs_input, t_hsenc, info, S_KEY_LEN+MAC_LEN) ENC_KEY = hs_keys[0:S_KEY_LEN] MAC_KEY = hs_keys[S_KEY_LEN:S_KEY_LEN+MAC_KEY_LEN] and sends, as the ENCRYPTED part of the INTRODUCE1 cell: CLIENT_PK [G_LENGTH bytes] ENCRYPTED_DATA [Padded to length of plaintext] MAC [MAC_LEN bytes] Substituting those fields into the INTRODUCE1 cell body format described in [FMT_INTRO1] above, we have AUTH_KEYID [32 bytes] ENC_KEYID [8 bytes] Any number of times: EXT_FIELD_TYPE [1 byte] EXT_FIELD_LEN [1 byte] EXT_FIELD [EXTRA_FIELD_LEN bytes] ZERO [1 byte] ENCRYPTED: CLIENT_PK [G_LENGTH bytes] ENCRYPTED_DATA [Padded to length of plaintext] MAC [MAC_LEN bytes] (This format is as documented in [FMT_INTRO1] above, except that here we describe how to build the ENCRYPTED portion. If the introduction point is running an older Tor that does not support this protocol, the first field is replaced by a 20-byte AUTH_KEYID_HASH field as described in [LEGACY-INTRODUCE1].) Here, the encryption key plays the role of B in the regular ntor handshake, and the AUTH_KEYID field plays the role of the node ID. The CLIENT_PK field is the public key X. The ENCRYPTED_DATA field is the message plaintext, encrypted with the symmetric key ENC_KEY. The MAC field is a MAC of all of the cell from the AUTH_KEYID through the end of ENCRYPTED_DATA, using the MAC_KEY value as its key. To process this format, the hidden service checks PK_VALID(CLIENT_PK) as necessary, and then computes ENC_KEY and MAC_KEY as the client did above, except using EXP(CLIENT_PK,b) in the calculation of secret_hs_input. The service host then checks whether the MAC is correct. If it is invalid, it drops the cell. Otherwise, it computes the plaintext by decrypting ENCRYPTED_DATA. The hidden service host now completes the service side of the extended ntor handshake, as described in tor-spec.txt section 5.1.4, with the modified PROTOID as given above. To be explicit, the hidden service host generates a keypair of y,Y = KEYGEN(), and uses its introduction point encryption key 'b' to computes: xb = EXP(X,b) secret_hs_input = xb | AUTH_KEYID | X | B | PROTOID info = m_hsexpand | subcredential hs_keys = HKDF(secret_hs_input, t_hsenc, info, S_KEY_LEN+MAC_LEN) HS_DEC_KEY = hs_keys[0:S_KEY_LEN] HS_MAC_KEY = hs_keys[S_KEY_LEN:S_KEY_LEN+MAC_KEY_LEN] (The above are used to check the MAC and then decrypt the encrypted data.) ntor_secret_input = EXP(X,y) | xb | ID | B | X | Y | PROTOID NTOR_KEY_SEED = H(secret_input, t_key) verify = H(secret_input, t_verify) auth_input = verify | ID | B | Y | X | PROTOID | "Server" (The above are used to finish the ntor handshake.) The server's handshake reply is: SERVER_PK Y [G_LENGTH bytes] AUTH H(auth_input, t_mac) [H_LENGTH bytes] These faileds can be send to the client in a RENDEZVOUS1 cell. (See [JOIN_REND] below.) The hidden service host now also knows the keys generated by the handshake, which it will use to encrypt and authenticate data end-to-end between the client and the server. These keys are as computed in tor-spec.txt section 5.1.4. 3.4. Authentication during the introduction phase. [INTRO-AUTH] Hidden services may restrict access only to authorized users. One mechanism to do so is the credential mechanism, where only users who know the credential for a hidden service may connect at all. For more fine-grained conntrol, a hidden service can be configured with password-based or public-key-based authentication. 3.4.1. Password-based authentication. To authenticate with a password, the user must include an extension field in the encrypted part of the INTRODUCE cell with an EXT_FIELD_TYPE type of [01] and the contents: Username [00] Password. The username may not include any [00] bytes. The password may. On the server side, the password MUST be stored hashed and salted, ideally with scrypt or something better. 3.4.2. Ed25519-based authentication. To authenticate with an Ed25519 private key, the user must include an extension field in the encrypted part of the INTRODUCE cell with an EXT_FIELD_TYPE type of [02] and the contents: Nonce [16 bytes] Pubkey [32 bytes] Signature [64 bytes] Nonce is a random value. Pubkey is the public key that will be used to authenticate. [TODO: should this be an identifier for the public key instead?] Signature is the signature, using Ed25519, of: "Hidserv-userauth-ed25519" Nonce (same as above) Pubkey (same as above) AUTH_KEYID (As in the INTRODUCE1 cell) ENC_KEYID (As in the INTRODUCE1 cell) The hidden service host checks this by seeing whether it recognizes and would accept a signature from the provided public key. If it would, then it checks whether the signature is correct. If it is, then the correct user has authenticated. Replay prevention on the whole cell is sufficient to prevent replays on the authentication. Users SHOULD NOT use the same public key with multiple hidden services. 4. The rendezvous protocol Before connecting to a hidden service, the client first builds a circuit to an arbitrarily chosen Tor node (known as the rendezvous point), and sends an ESTABLISH_RENDEZVOUS cell. The hidden service later connects to the same node and sends a RENDEZVOUS cell. Once this has occurred, the relay forwards the contents of the RENDEZVOUS cell to the client, and joins the two circuits together. 4.1. Establishing a rendezvous point [EST_REND_POINT] The client sends the rendezvous point a RELAY_COMMAND_ESTABLISH_RENDEZVOUS cell containing a 20-byte value. RENDEZVOUS_COOKIE [20 bytes] Rendezvous points MUST ignore any extra bytes in an ESTABLISH_RENDEZVOUS message. (Older versions of Tor did not.) The rendezvous cookie is an arbitrary 20-byte value, chosen randomly by the client. The client SHOULD choose a new rendezvous cookie for each new connection attempt. If the rendezvous cookie is already in use on an existing circuit, the rendezvous point should reject it and destroy the circuit. Upon receiving a ESTABLISH_RENDEZVOUS cell, the rendezvous point associates the cookie with the circuit on which it was sent. It replies to the client with an empty RENDEZVOUS_ESTABLISHED cell to indicate success. [TODO: make this extensible] The client MUST NOT use the circuit which sent the cell for any purpose other than rendezvous with the given location-hidden service. The client should establish a rendezvous point BEFORE trying to connect to a hidden service. 4.2. Joining to a rendezvous point [JOIN_REND] To complete a rendezvous, the hidden service host builds a circuit to the rendezvous point and sends a RENDEZVOUS1 cell containing: RENDEZVOUS_COOKIE [20 bytes] HANDSHAKE_INFO [variable; depends on handshake type used.] If the cookie matches the rendezvous cookie set on any not-yet-connected circuit on the rendezvous point, the rendezvous point connects the two circuits, and sends a RENDEZVOUS2 cell to the client containing the contents of the RENDEZVOUS1 cell. Upon receiving the RENDEZVOUS2 cell, the client verifies that the HANDSHAKE_INFO correctly completes a handshake, and uses the handshake output to derive shared keys for use on the circuit. [TODO: Should we encrypt HANDSHAKE_INFO as we did INTRODUCE2 contents? It's not necessary, but it could be wise. Similarly, we should make it extensible.] 4.3. Using legacy hosts as rendezvous points The behavior of ESTABLISH_RENDEZVOUS is unchanged from older versions of this protocol, except that relays should now ignore unexpected bytes at the end. Old versions of Tor required that RENDEZVOUS cell payloads be exactly 168 bytes long. All shorter rendezvous payloads should be padded to this length with [00] bytes. 5. Encrypting data between client and host A successfully completed handshake, as embedded in the INTRODUCE/RENDEZVOUS cells, gives the client and hidden service host a shared set of keys Kf, Kb, Df, Db, which they use for sending end-to-end traffic encryption and authentication as in the regular Tor relay encryption protocol, applying encryption with these keys before other encryption, and decrypting with these keys before other encryption. The client encrypts with Kf and decrypts with Kb; the service host does the opposite. 6. Open Questions: Scaling hidden services is hard. There are on-going discussions that you might be able to help with. See [SCALING-REFS]. How can we improve the HSDir unpredictability design proposed in [SHAREDRANDOM]? See [SHAREDRANDOM-REFS] for discussion. How can hidden service addresses become memorable while retaining their self-authenticating and decentralized nature? See [HUMANE-HSADDRESSES-REFS] for some proposals; many more are possible. Hidden Services are pretty slow. Both because of the lengthy setup procedure and because the final circuit has 6 hops. How can we make the Hidden Service protocol faster? See [PERFORMANCE-REFS] for some suggestions. References: [KEYBLIND-REFS]: https://trac.torproject.org/projects/tor/ticket/8106 https://lists.torproject.org/pipermail/tor-dev/2012-September/004026.html [SHAREDRANDOM-REFS]: https://trac.torproject.org/projects/tor/ticket/8244 https://lists.torproject.org/pipermail/tor-dev/2013-November/005847.html https://lists.torproject.org/pipermail/tor-talk/2013-November/031230.html [SCALING-REFS]: https://lists.torproject.org/pipermail/tor-dev/2013-October/005556.html [HUMANE-HSADDRESSES-REFS]: https://gitweb.torproject.org/torspec.git/blob/HEAD:/proposals/ideas/xxx-on… http://archives.seul.org/or/dev/Dec-2011/msg00034.html [PERFORMANCE-REFS]: "Improving Efficiency and Simplicity of Tor circuit establishment and hidden services" by Overlier, L., and P. Syverson [TODO: Need more here! Do we have any? :( ] [ATTACK-REFS]: "Trawling for Tor Hidden Services: Detection, Measurement, Deanonymization" by Alex Biryukov, Ivan Pustogarov, Ralf-Philipp Weinmann "Locating Hidden Servers" by Lasse Øverlier and Paul Syverson [ED25519-REFS]: "High-speed high-security signatures" by Daniel J. Bernstein, Niels Duif, Tanja Lange, Peter Schwabe, and Bo-Yin Yang. http://cr.yp.to/papers.html#ed25519 Appendix A. Signature scheme with key blinding [KEYBLIND] As described in [IMD:DIST] and [SUBCRED] above, we require a "key blinding" system that works (roughly) as follows: There is a master keypair (sk, pk). Given the keypair and a nonce n, there is a derivation function that gives a new blinded keypair (sk_n, pk_n). This keypair can be used for signing. Given only the public key and the nonce, there is a function that gives pk_n. Without knowing pk, it is not possible to derive pk_n; without knowing sk, it is not possible to derive sk_n. It's possible to check that a signature make with sk_n while knowing only pk_n. Someone who sees a large number of blinded public keys and signatures made using those public keys can't tell which signatures and which blinded keys were derived from the same master keypair. You can't forge signatures. [TODO: Insert a more rigorous definition and better references.] We propose the following scheme for key blinding, based on Ed25519. (This is an ECC group, so remember that scalar multiplication is the trapdoor function, and it's defined in terms of iterated point addition. See the Ed25519 paper [Reference ED25519-REFS] for a fairly clear writeup.) Let the basepoint be written as B. Assume B has prime order l, so lB=0. Let a master keypair be written as (a,A), where a is the private key and A is the public key (A=aB). To derive the key for a nonce N and an optional secret s, compute the blinding factor h as H(A | s, B, N), and let: private key for the period: a' = h a public key for the period: A' = h' A = (ha)B Generating a signature of M: given a deterministic random-looking r (see EdDSA paper), take R=rB, S=r+hash(R,A',M)ah mod l. Send signature (R,S) and public key A'. Verifying the signature: Check whether SB = R+hash(R,A',M)A'. (If the signature is valid, SB = (r + hash(R,A',M)ah)B = rB + (hash(R,A',M)ah)B = R + hash(R,A',M)A' ) See [KEYBLIND-REFS] for an extensive discussion on this scheme and possible alternatives. I've transcribed this from a description by Tanja Lange at the end of the thread. [TODO: We'll want a proof for this.] (To use this with Tor, set N = INT_8(period-number) | INT_8(Start of period in seconds since epoch).) Appendix B. Selecting nodes [PICKNODES] Picking introduction points Picking rendezvous points Building paths Reusing circuits (TODO: This needs a writeup) Appendix C. Recommendations for searching for vanity .onions [VANITY] EDITORIAL NOTE: The author thinks that it's silly to brute-force the keyspace for a key that, when base-32 encoded, spells out the name of your website. It also feels a bit dangerous to me. If you train your users to connect to llamanymityx4fi3l6x2gyzmtmgxjyqyorj9qsb5r543izcwymle.onion I worry that you're making it easier for somebody to trick them into connecting to llamanymityb4sqi0ta0tsw6uovyhwlezkcrmczeuzdvfauuemle.onion Nevertheless, people are probably going to try to do this, so here's a decent algorithm to use. To search for a public key with some criterion X: Generate a random (sk,pk) pair. While pk does not satisfy X: Add the number 1 to sk Add the scalar B to pk Return sk, pk. This algorithm is safe [source: djb, personal communication] [TODO: Make sure I understood correctly!] so long as only the final (sk,pk) pair is used, and all previous values are discarded. To parallelize this algorithm, start with an independent (sk,pk) pair generated for each independent thread, and let each search proceed independently. Appendix D. Numeric values reserved in this document [TODO: collect all the lists of commands and values mentioned above]

8 22

Request to expunge project 'torsocks' on Google Code
by Virgil Griffith 26 Oct '14

26 Oct '14

Sitting with David Goulet, it's problematic that when I search for "torsocks" I get the old Google Code page instead of the up-to-date page on http://gitweb.torproject.org This is problematic because people report bugs to the Google Code repository instead of the torproject repository. Jake/Robert: You are the project owners on Google Code. Could you please remove the project? Much love, -Virgil

6 8

[RFC] Proposal draft: The move to a single guard node
by George Kadianakis 17 Sep '14

17 Sep '14

> On Mon, Apr 7, 2014 at 11:34 AM, George Kadianakis > So, based on your > response, IIUC, the idea is that because young > > guards are underutilized, we want to increase the probability of them > > being chosen in non-guard positions, so that they become more utilized > > till more people pick them as guards? > > Right. > > > Some questions on the terminology you used: > > > > a) What do you mean by 'last rotation period'? When you say "for > > fraction k of the last rotation period", you mean that if the > > authorities read consensuses for the past 12 months, and the relay R > > was up as a guard for 6 months, then k would be 6/12 == 0.5? > > The "rotation period" is the average length of time between choosing > guards. For example, with the current parameters (IIRC), clients > discard a guard and choose a new one at a time uniformly chosen > between 30 and 60 days. So the rotation period is 45 days = 45*24 > hours = 1080 consensus votes, and essentially in each of those hours, > 1/1080 of the clients choose a new guard. So the last rotation > period's worth of status documents should be the only ones that matter > for figuring out how heavily a node is used as a guard. For example, > if a relay has had the guard flag for 15 days (=360 consensus > documents) out of the last 45, then that relay has about k=360/1080 of > the number of clients using it as a guard as it would have, if it had > been a guard for the full 1080 hours. > Ah, I see. I originally misinterpreted what you meant by 'last rotation period'. > (N.B. I'm making an assumption that guard rotations will be uniformly > distributed over the period. This should be safe in equilibrium, but > might get kind of shaky when the period first increases to 9 months or > whatever the final decision is) > Yep. We also don't consider new releases of TBB/Tails (many users pick new entry guards), or sudden bulk arrival of users (botnets, real life events, etc.). > > b) By (weight with the guard flag) you mean the result of: > > <consensus BW> * <consensus weight> ? > > > > Is that right, or did I misunderstand you? > > Yes. > > > Assuming the above terminology assumptions, I began trying to > > understand your formula. First of all, I was wondering how you ended > > up with it? Is this some standard form? I'm not very familiar with > > these things. > > Well, the way the weights work is that they compute what fraction of > guard bandwidth should be used for middle and exit traffic, assuming > that the rest will be all used up by client-guard connections. That > is, the weights are telling us to use (1-(<consensus middle weight> + > <consensus exit weight>)) fraction of the guard's bandwidth for these > connections. > > But if a relay has only fraction k of its "guard bandwidth" used up > this way, then (1-k) of this bandwidth should go back into the pool > for other positions. I think that's what the formula does, but I > could have it wrong. Does that make sense? > I see. That makes sense, I think. I will ponder on this a bit more, and then edit the proposal. (I would like to think a bit more about how accurate the assumption "relay has been a guard for 0.25 of the rotation period => relay has 0.25 of its bandwidth occupied for guard purposes") Thanks!

3 6

Call for testing/review: obfsclient-0.0.1
by Yawning Angel 25 Aug '14

25 Aug '14

Hello all, I just tagged the obfsclient v0.0.1 (Release) Download at: https://github.com/Yawning/obfsclient/releases/tag/v0.0.1 Major changes since 0.0.1-rc2: * Invalid padding lengths in obfs3/ScrambleSuit handshakes are now correctly handled. * Handshake timeout is now set to a random interval between 60 and 120 seconds. * The ScrambleSuit probability distributions are now closer to what obfsproxy generates. * "--version" will now cause obfsclient to print the version and exit. * Various code cleanups. Some notes about ScrambleSuit: * I reverted the "workaround" I had for bug #11100, so Session Ticket handshakes to bridges running obfsproxy 0.2.6 will fail if they have been running long enough to trigger the bug condition. * Actual protocol behavior is closer to obfsproxy than my previous releases, but still not identical to 0.2.7. the next obfsproxy release will close the difference further. Hopefully it is of some use to people. Special thanks to Fabian Keil for help testing and fixing the various release candidates. Questions, comments, feedback appreciated as always, -- Yawning Angel

2 4

Proposal 220 (revised): Migrate server identity keys to Ed25519
by Nick Mathewson 18 Aug '14

18 Aug '14

I've revised proposal 220 based on commentary from Roger. The biggest changes is tweaking all of the things called "certificates" to make them actually follow the same format to greatest the extent possible. To see diffs, you can use git, or browse the gitweb site at https://gitweb.torproject.org/torspec.git/history/HEAD:/proposals/220-ecc-i… Filename: 220-ecc-id-keys.txt Title: Migrate server identity keys to Ed25519 Authors: Nick Mathewson Created: 12 August 2013 Target: 0.2.x.x Status: Draft [Note: This is a draft proposal; I've probably made some important mistakes, and there are parts that need more thinking. I'm publishing it now so that we can do the thinking together.] 0. Introduction In current Tor designs, router identity keys are limited to 1024-bit RSA keys. Clearly, that should change, because RSA doesn't represent a good performance-security tradeoff nowadays, and because 1024-bit RSA is just plain too short. We've already got an improved circuit extension handshake protocol that uses curve25519 in place of RSA1024, and we're using (where supported) P256 ECDHE in our TLS handshakes, but there are more uses of RSA1024 to replace, including: * Router identity keys * TLS link keys * Hidden service keys This proposal describes how we'll migrate away from using 1024-bit RSA in the first two, since they're tightly coupled. Hidden service crypto changes will be complex, and will merit their own proposal. In this proposal, we'll also (incidentally) be extirpating a number of SHA1 usages. 1. Overview When this proposal is implemented, every router will have an Ed25519 identity key in addition to its current RSA1024 public key. Ed25519 (specifically, Ed25519-SHA-512 as described and specified at http://ed25519.cr.yp.to/) is a desirable choice here: it's secure, fast, has small keys and small signatures, is bulletproof in several important ways, and supports fast batch verification. (It isn't quite as fast as RSA1024 when it comes to public key operations, since RSA gets to take advantage of small exponents when generating public keys.) (For reference: In Ed25519 public keys are 32 bytes long, private keys are 64 bytes long, and signatures are 64 bytes long.) To mirror the way that authority identity keys work, we'll fully support keeping Ed25519 identity keys offline; they'll be used to sign long-ish term signing keys, which in turn will do all of the heavy lifting. A signing key will get used to sign the things that RSA1024 identity keys currently sign. 1.1. 'Personalized' signatures Each of the keys introduced here is used to sign more than one kind of document. While these documents should be unambiguous, I'm going to forward-proof the signatures by specifying each signature to be generated, not on the document itself, but on the document prefixed with some distinguishing string. 2. Certificates and Router descriptors. 2.1. Certificates When generating a signing key, we also generate a certificate for it. Unlike the certificates for authorities' signing keys, these certificates need to be sent around frequently, in significant numbers. So we'll choose a compact representation. VERSION [1 Byte] CERT_TYPE [1 Byte] EXPIRATION_DATE [3 Bytes] CERT_KEY_TYPE [1 byte] CERTIFIED_KEY [32 Bytes] EXTENSIONS [variable length, up to length of certificate minus 64 bytes.] SIGNATURE [64 Bytes] The "VERSION" field holds the value [01]. The "CERT_TYPE" field holds a value depending on the type of certificate. (See appendix A.1.) The CERTIFIED_KEY field is an Ed25519 public key if CERT_KEY_TYPE is [01], or a SHA256 hash of some other key type depending on the value of CERT_KEY_TYPE. The EXPIRATION_DATE is a date, given in HOURS since the epoch, after which this certificate isn't valid. (A three-byte field here will work fine until 5797 A.D.) The EXTENSIONS field contains zero or more extensions, each of the format: ExtLength [1 or 2 bytes] ExtType [1 or 2 bytes] ExtData [Length bytes] The ExtLength and ExtType fields can represent values between 0 and 2^15-1, representing values under 128 as "0xxxxxxx" and values over 128 as "1xxxxxxx yyyyyyyy". The meaning of the ExtData field in an extension is type-dependent. It is an error for an extension to be truncated; such a certificate is invalid. Before processing any certificate, parties MUST know which identity key it is supposed to be signed by, and then check the signature. The signature is formed by signing the first N-64 bytes of the certificate prefixed with the string "Tor node signing key certificate v1". 2.2. Basic extensions 2.2.1. Signed-with-ed25519-key extension [type 04] In several places, it's desirable to bundle the key signing a certificate along with the certificate. We do so with this extension. ExtLength = 32 ExtData = An ed25519 key [32 bytes] When this extension is present, it MUST match the key used to sign the certificate. This 2.3. Revoking keys. We also specify a revocation document for revoking a signing key or an identity key. Its format is: FIXED_PREFIX [8 Bytes] VERSION [1 Byte] KEYTYPE [1 Byte] IDENTITY_KEY [32 Bytes] REVOKED_KEY [32 Bytes] PUBLISHED [8 Bytes] REV_EXTENSIONS [variable length, up to length of revocation document minus 64 bytes] SIGNATURE [64 Bytes] FIXED_PREFIX is "REVOKEID" or "REVOKESK". VERSION is [01]. KEYTYPE is [01] for revoking a signing key or [02] for revoking an identity key. REVOKED_KEY is the key being revoked; IDENTITY_KEY is the node's Ed25519 identity key. PUBLISHED is the time that the document was generated, in seconds since the epoch. REV_EXTENSIONS is left for a future version of this document. The SIGNATURE is generated with the same key as in IDENTITY_KEY, and covers the entire revocation, prefixed with "Tor key revocation v1". Using these revocation documents is left for a later specification. 2.4. Managing keys By default, we can keep the easy-to-setup key management properties that Tor has now, so that node operators aren't required to have offline public keys: * When a Tor node starts up with no Ed25519 identity keys, it generates a new identity keypair. * When a Tor node has an Ed25519 identity keypair, and it has no signing key, or its signing key is going to expire within the next 48 hours, it generates a new signing key to last 30 days. But we also support offline identity keys: * When a Tor node starts with an Ed25519 public identity key but no private identity key, it checks whether it has a currently valid certified signing keypair. If it does, it starts. Otherwise, it refuses to start. * If a Tor node's signing key is going to expire soon, it starts warning the user. If it is expired, then the node shuts down. 2.5. Router descriptors We specify the following element that may appear at most once in each router descriptor: "identity-ed25519" SP certificate NL The identity-key and certificate are base64-encoded with terminating =s removed. When this element is present, it MUST appear as the first or second element in the router descriptor. [XXX The rationale here is to allow extracting the identity key and signing key and checking the signature before fully parsing the rest of the document. -NM] The certificate has CERT_TYPE of [04]. It must include a signed-with-ed25519-key extension (see section 2.2.1), so that we can extract the identity key. When an identity-ed25519 element is present, there must also be a "router-signature-ed25519" element. It MUST be the next-to-last element in the descriptor, appearing immediately before the RSA signature. It MUST contain an ed25519 signature of the entire document, from the first character up to but not including the "router-signature-ed25519" element, prefixed with the string "Tor router descriptor signature v1". Its format is: "router-signature-ed25519" SP signature NL Where 'signature' is encoded in base64 with terminating =s removed. The signing key in the certificate MUST be the one used to sign the document. Note that these keys cross-certify as follows: the ed25519 identity key signs the ed25519 signing key in the certificate. The ed25519 signing key signs itself and the ed25519 identity key and the RSA identity key as part of signing the descriptor. And the RSA identity key also signs all three keys as part of signing the descriptor. 2.5.1. Checking descriptor signatures. Current versions of Tor will handle these new formats by ignoring the new fields, and not checking any ed25519 information. New versions of Tor will have a flag that tells them whether to check ed25519 information. When it is set, they must check: * All RSA information and signatures that Tor implementations currently check. * If the identity-ed25519 line is present, it must be well-formed, and the certificate must be well-formed and correctly signed, and there must be a valid router-signature-ed25519 signature. * If we require an ed25519 key for this node (see 3.1 below), the ed25519 key must be present. Authorities and directory caches will have this flag always-on. For clients, it will be controlled by a torrc option and consensus option, to be set to "always-on" in the future once enough clients support it. 2.5.2. Extra-info documents Extra-info documents now include "identity-ed25519" and "router-signature-ed25519" fields in the same positions in which they appear in router descriptors. Additionally, we add the base64-encoded, =-stripped SHA256 digest of a node's extra-info document field to the extra-info-digest line in the router descriptor. (All versions of Tor that recognize this line allow an extra field there.) 2.5.3. A note on signature verification Here and elsewhere, we're receiving a certificate and a document signed with the key certified by that certificate in the same step. This is a fine time to use the batch signature checking capability of Ed25519, so that we can check both signatures at once without (much) additional overhead over checking a single signature. 3. Consensus documents and authority operation 3.1. Handling router identity at the authority When receiving router descriptors, authorities must track mappings between RSA and Ed25519 keys. Rule 1: Once an authority has seen an Ed25519 identity key and an RSA identity key together on the same (valid) descriptor, it should no longer accept any descriptor signed by that RSA key with a different Ed25519 key, or that Ed25519 key with a different RSA key. Rule 2: Once an authority has seen an Ed25519 identity key and an RSA identity key on the same descriptor, it should no longer accept any descriptor signed by that RSA key unless it also has that Ed25519 key. These rules together should enforce the property that, even if an attacker manages to steal or factor a node's RSA identity key, the attacker can't impersonate that node to the authorities, even when that node is identified by its RSA key. Enforcement of Rule 1 should be advisory-only for a little while (a release or two) while node operators get experience having Ed25519 keys, in case there are any bugs that cause or force identity key replacement. Enforcement of Rule 2 should be advisory-only for little while, so that node operators can try 0.2.5 but downgrade to 0.2.4 without being de-listed from the consensus. [XXX I could specify a way to do a signed "I'm downgrading for a while!" statement, and kludge some code back into 0.2.4.x to better support that?] 3.2. Formats Vote and microdescriptor documents now contain an optional "id" field for each routerstatus section. Its format is: "id" SP "ed25519" SP ed25519-identity NL where ed25519-identity is base64-encoded, with trailing = characters omitted. In vote documents, it may be replaced by the format: "id" SP "ed25519" SP "none" NL which indicates that the node does not have an ed25519 identity. (In a microdescriptor, a lack of "id" line means that the node has no ed25519 identity.) [XXXX Should the id entries in consensuses go into microdescriptors instead? I think perhaps so. -NM] A vote or consensus document is ill-formed if it includes the same ed25519 identity key twice. 3.3. Generating votes An authority should pick which descriptor to choose for a node as before, and include the ed25519 identity key for the descriptor if it's present. As a transition, before Rule 1 and Rule 2 in 3.1 are fully enforced, authorities need a way to deal with the possibility that there might be two nodes with the same ed25519 key but different RSA keys. In that case, it votes for the one with the most recent publication date. (The existing rules already prevent an authority from voting for two servers with the same RSA identity key.) 3.4. Generating a consensus from votes This proposal requires a new consensus vote method. When we deploy it, we'll pick the next available vote method in sequence to use for this. When the new consensus method is in use, we must choose nodes first by ECC key, then by RSA key. First, for every {ECC identity key, RSA identity key} pair listed by over half of the voting authorities, list it, unless some other RSA identity key digest is listed more popularly for the ECC key. Break ties in favor of low RSA digests. Treat all routerstatus entries that mention this <ECC,RSA> pair as being for the same router, and all routerstatus entries that mention the same RSA key with an unspecified ECC key as being for the same router. Then, for every node that has previously not been listed, perform the current routerstatus algorithm: listing a node if it has been listed by at least N/2 voting authorities, and treating all routerstatuses containing the same identity as the same router. In other words: Let Entries = [] for each ECC ID listed by any voter: Find the RSA key associated with that ECC ID by the most voters, breaking ties in favor of low RSA keys. If that ECC ID and RSA key ID are listed by > N/2 voting authorities: Add the consensus of the routerstatus entries for those voters, along with the routerstatus entry for every voter that included that RSA key with no ECC key, to Entries. Include the ECC ID in the consensus. For each RSA key listed by any voter: If that RSA key is already in Entries, skip it. If the RSA key is listed by > N/2 voting authorities: Add the consensus of the routerstatus entries for those voters to Entries. Do not include an ECC key in the consensus. [XXX Think about this even more.] 4. The link protocol 4.1. Overview of the status quo This section won't make much sense unless you grok the v3 link protocol as described in tor-spec.txt, first proposed in proposal 195. So let's review. In the v3 link protocol, the client completes a TLS handshake with the server, in which the server uses an arbitrary certificate signed with an RSA key. The client then sends a VERSIONS cell. The server replies with a VERSIONS cell to negotiate version 3 or higher. The server also sends a CERTS cell and an AUTH_CHALLENGE cell and a NETINFO cell. The CERTS cell from the server contains a set of one or more certificates that authenticate the RSA key used in the TLS handshake. (Right now there's one self-signed RSA identity key certificate, and one certificate signing the RSA link key with the identity key. These certificates are X509.) Having received a CERTS cell, the client has enough information to authenticate the server. At this point, the client may send a NETINFO cell to finish the handshake. But if the client wants to authenticate as well, it can send a CERTS cell and an AUTENTICATE cell. The client's CERTS cell also contains certs of the same general kinds as the server's key file: a self-signed identity certificate, and an authentication certificate signed with the identity key. The AUTHENTICATE cell contains a signature of various fields, including the contents of the AUTH_CHALLENGE which the server sent cell, using the client's authentication key. These cells allow the client to authenticate to the server. 4.2. Link protocol changes for ECC ID keys We add four new CertType values for use in CERTS cells: 4: Ed25519 signing key 5: Link key certificate certified by Ed25519 signing key 6: Ed25519 TLS authentication key certified by Ed25519 signing key 7: RSA cross-certificate for Ed25519 identity key These correspond to types used in the CERT_TYPE field of the certificates. The content of certificate type [04] (Ed25519 signing key) is as in section 2.5 above, containing an identity key and the signing key, both signed by the identity key. Certificate type [05] (Link certificate signed with Ed25519 signing key) contains a SHA256 digest of the X.509 link certificate used on the TLS connection in its key field; it is signed with the signing key. Certificate type [06] (Ed25519 TLS authentication signed with Ed25519 signing key) has the signing key used to sign the AUTHENTICATE cell described later in this section. Certificate type [07] (Cross-certification of Ed25519 identity with RSA key) contains the following data: ED25519_KEY [32 bytes] EXPIRATION_DATE [4 bytes] SIGNATURE [128 bytes] Here, the Ed25519 identity key is signed with router's RSA identity key, to indicate that authenticating with a key certified by the Ed25519 key counts as certifying with RSA identity key. (The signature is computed on the SHA256 hash of the non-signature parts of the certificate, prefixed with the string "Tor TLS RSA/Ed25519 cross-certificate".) (There's no reason to have a corresponding Ed25519-signed-RSA-key certificate here, since we do not treat authenticating with an RSA key as proving ownership of the Ed25519 identity.) Relays with Ed25519 keys should always send these certificate types in addition to their other certificate types. Non-bridge relays with Ed25519 keys should generate TLS link keys of appropriate strength, so that the certificate chain from the Ed25519 key to the link key is strong enough. We add a new authentication type for AUTHENTICATE cells: "Ed25519-TLSSecret", with AuthType value 2. Its format is the same as "RSA-SHA256-TLSSecret", except that the CID and SID fields support more key types; some strings are different, and the signature is performed with Ed25519 using the authentication key from a type-6 cert. Clients can send this AUTHENTICATE type if the server lists it in its AUTH_CHALLENGE cell. Modified values and new fields below are marked with asterisks. TYPE: The characters "AUTH0002"* [8 octets] CID: A SHA256 hash of the initiator's RSA1024 identity key [32 octets] SID: A SHA256 hash of the responder's RSA1024 identity key [32 octets] *CID_ED: The initiator's Ed25519 identity key [32 octets] *SID_ED: The responder's Ed25519 identity key, or all-zero. [32 octets] SLOG: A SHA256 hash of all bytes sent from the responder to the initiator as part of the negotiation up to and including the AUTH_CHALLENGE cell; that is, the VERSIONS cell, the CERTS cell, the AUTH_CHALLENGE cell, and any padding cells. [32 octets] CLOG: A SHA256 hash of all bytes sent from the initiator to the responder as part of the negotiation so far; that is, the VERSIONS cell and the CERTS cell and any padding cells. [32 octets] SCERT: A SHA256 hash of the responder's TLS link certificate. [32 octets] TLSSECRETS: A SHA256 HMAC, using the TLS master secret as the secret key, of the following: - client_random, as sent in the TLS Client Hello - server_random, as sent in the TLS Server Hello - the NUL terminated ASCII string: "Tor V3 handshake TLS cross-certification with Ed25519"* [32 octets] RAND: A 24 byte value, randomly chosen by the initiator. [24 octets] *SIG: A signature of all previous fields using the initiator's Ed25519 authentication flags. [variable length] If you've got a consensus that lists an ECC key for a node, but the node doesn't give you an ECC key, then refuse this connection. 5. The extend protocol We add a new NSPEC node specifier for use in EXTEND2 cells, with LSTYPE value [03]. Its length must be 32 bytes; its content is the Ed25519 identity key of the target node. Clients should use this type only when: * They know an Ed25519 identity key for the destination node. * The source node supports EXTEND2 cells * A torrc option is set, _or_ a consensus value is set. We'll leave the consensus value off for a while until more clients support this, and then turn it on. When picking a channel for a circuit, if this NSPEC value is provided, then the RSA identity *and* the Ed25519 identity must match. If we have a channel with a given Ed25519 ID and RSA identity, and we have a request for that Ed25519 ID and a different RSA identity, we do not attempt to make another connection: we just fail and DESTROY the circuit. If we receive an EXTEND or EXTEND2 request for a node listed in the consensus, but that EXTEND/EXTEND2 request does not include an Ed25519 identity key, the node SHOULD treat the connection as failed if the Ed25519 identity key it receives does not match the one in the consensus. 6. Naming nodes in the interface Anywhere in the interface that takes an $identity should be able to take an ECC identity too. ECC identities are case-sensitive base64 encodings of Ed25519 identity keys. You can use $ to indicate them as well; we distinguish RSA identity digests by length. When we need to indicate an Ed25519 identity key in a hostname format (as in a .exit address), we use the lowercased version of the name, and perform a case-insensitive match. (This loses us a little less than one bit per byte of name, leaving plenty of bits to make sure we choose the right node.) Nodes must not list Ed25519 identities in their family lines; clients and authorities must not honor them there. (Doing so would make different clients change paths differently in a possibly manipulatable way.) Clients shouldn't accept .exit addresses with Ed25519 names on SOCKS or DNS ports by default, even when AllowDotExit is set. We can add another option for them later if there's a good reason to have this. We need an identity-to-node map for ECC identity and for RSA identity. The controller interface will need to accept and report Ed25519 identity keys as well as (or instead of) RSA identity keys. That's a separate proposal, though. 7. Hidden service changes out of scope Hidden services need to be able to identify nodes by ECC keys, just as they will need to include ntor keys as well as TAP keys. Not just yet though. This needs to be part of a bigger hidden service revamping strategy. 8. Proposed migration steps Once a few versions have shipped with Ed25519 key support, turn on "Rule 1" on the authorities. (Don't allow an Ed25519<->RSA pairing to change.) Once the release with these changes is in beta or rc, turn on the consensus option for everyone who receives descriptors with Ed25519 identity keys to check them. Once the release with these changes is in beta or rc, turn on the consensus option for clients to generate EXTEND2 requests with Ed25519 identity keys. Once the release with these changes has been stable for a month or two, turn on "Rule 2" on authorities. (Don't allow nodes that have advertised an Ed25519 key to stop.) 9. Future proposals * Ed25519 identity support on the controller interface * Supporting nodes without RSA keys * Remove support for nodes without Ed25519 keys * Ed25519 support for hidden services * Bridge identity support. * Ed25519-aware family support A.1. List of certificate types The values marked with asterisks are not types corresponding to the certificate format of section 2.1. Instead, they are reserved for RSA-signed certificates to avoid conflicts between the certificate type enumeration of the CERTS cell and the certificate type enumeration of in our Ed25519 certificates. **[00],[01],[02],[03] - Reserved to avoid conflict with types used in CERTS cells. [04] - signing a signing key with an identity key (Section 2.5) [05] - TLS link certificate signed with ed25519 signing key (Section 4.2) [06] - Ed25519 authentication key signed with ed25519 signing key (Section 4.2) **[07] - reserved for RSA identity cross-certification (Section 4.2) A.2. List of extension types [01] - signed-with-ed25519-key (section 2.2.1) A.3. List of signature prefixes We describe various documents as being signed with a prefix. Here are those prefixes: "Tor router descriptor signature v1" (section 2.5) "Tor node signing key certificate v1" (section 2.1) A.4. List of certified key types [01] ed25519 key [02] SHA256 hash of an RSA key [03] SHA256 hash of an X.509 certificate A.5. Reserved numbers We need a new consensus algorithm number to encompass checking ed25519 keys and putting them in microdescriptors. We need new CertType values for use in CERTS cells. We reserved in section 4.2. 4: Ed25519 signing key 5: Link key certificate certified by Ed25519 signing key 6: TLS authentication key certified by Ed25519 signing key 7: RSA cross-certificate for Ed25519 identity key

4 3

Proposal idea: Stop assigning (and eventually supporting) the Named flag
by Sebastian Hahn 13 Aug '14

13 Aug '14

Filename: xxx-kill-named-flag.txt Title: Stop assigning (and eventually supporting) the Named flag Authors: Sebastian Hahnn Created: 10 April 2014 Target: 0.2.5 Status: Draft 1. Intro and motivation Currently, Tor supports the concept of linking a Tor relay's nickname to its identity key. This happens automatically as a new relay joins the network with a unique nickname, and keeps it for a while. To indicate that a nickname is linked to the presented identity, the directory authorities vote on a Named flag for all relays where they have such a link. Not all directory authorities are currently doing this - in fact, there are only two, gabelmoo and tor26. For a long time, we've been telling everyone to not rely on relay nicknames, even if the Named flag is assigned. This has two reasons: First off, it adds another trust requirement on the directory authorities, and secondly naming may change over time as relays go offline for substantial amounts of time. Now that a significant portion of the network is required to rotate their identity keys, few relays will keep their Named flag. We should use this chance to stop assigning Named flags. 2. Design None. Tor clients already support consensuses without Named flags, and testing in private Tor networks has never revealed any issues in this regard. 3. Implementation The gabelmoo and tor26 directory authorities can simply remove the NamingAuthoritativeDirectory configuration option to stop giving out Named flags. This will mean the consensus won't include Named and Unnamed flags any longer. The code collecting naming statistics is independent of Tor, so it can run a while longer to ensure Naming can be switched on if unforeseen issues arise. Once this has been shown to not cause any issues, support for the Named flag can be removed from the Tor client implementation, and support for the NamingAuthoritativeDirectory can be removed from the Tor directory authority implementation. 4. Open questions None.

3 6

[PATCH] entrynodes.c: Improve readability (issue 9971)
by Martin Kepplinger 08 Jul '14

08 Jul '14

Maybe we can do away with issue 9971 and improve readability: https://trac.torproject.org/projects/tor/ticket/9971 As response to this mail, I'll append seperate patches for the 3 sub-issues mentioned. They apply (and are build-tested) seperately to the current tree, so a maintainer can quickly pick one of them up, if happy with it. There shouldn't be a conflict in *1* and *2* but I could append a patchset anyway. sub-issue *3* is *only* a call for advice and will be written on top of the other ones, after discussion. 1* rename entry_guard_t's made_contact to used_so_save_if_down I think that's readable. Is that about what arma had in mind? 2* rename for_discovery argument of add_an_entry_guard() to I like probationary more than provisional. Those 2 are suggested in issue 9971. I chose forced_probationary for now, because isn't it strictly a suboptimal situation in terms of desired 'grade of anonymity'. What do you think? 3* NEEDS REVIEW FIRST: regarding the int arguments of add_an_entry_guard(). I look at: node_t *chosen is a node to add. prepend is set if the guard should become first in the list? there are 2 users of add_an_entry_guard() that pass it a chosen node. One is a bridge (prepend) and the other one is a user-defined node (!prepend), so: Given the fact that the list is not supposed to be long and the two 'users' are somewhat similar, why not prepend the node if explicitly given?

1 4

[PATCH] remove test for remote SOCKS Port at config validation
by Martin Kepplinger 08 Jul '14

08 Jul '14

(why doesn't git send-email work for this list?) this is UNTESTED and for now, more of a question if this may suffice to close ticket 4019: -- Martin Kepplinger http://martinkepplinger.com

1 1

[PATCH] Add some words about meek in proposal 203
by Lunar 07 Jul '14

07 Jul '14

This is mostly David Fifield's words from an email exchange. --- I re-read proposal 203 the other day and wondered how it was related to the meek pluggable transport. As I might not be the only one, I thought it could be worthwhile to share David's answer. Feel free to improve! proposals/203-https-frontend.txt | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/proposals/203-https-frontend.txt b/proposals/203-https-frontend.txt index 26101b3..df30cd5 100644 --- a/proposals/203-https-frontend.txt +++ b/proposals/203-https-frontend.txt @@ -245,3 +245,31 @@ Side note: What to put on the webserver? "Something to add to your HTTPS website" rather than as a standalone installation. +Related work: + + meek [1] is a pluggable transport that uses HTTP for carrying bytes + and TLS for obfuscation. Traffic is relayed through a third-party + server (Google App Engine). It uses a trick to talk to the third + party so that it looks like it is talking to an unblocked server. + + meek itself is not really about HTTP at all. It uses HTTP only + because it's convenient and the big Internet services we use as cover + also use HTTP. meek uses HTTP as a transport, and TLS for + obfuscation, but the key idea is really "domain fronting," where it + appears to the censor you are talking to one domain (www.google.com), + but behind the scenes you are talking to another + (meek-reflect.appspot.com). The meek-server program is an ordinary + HTTP (not necessarily even HTTPS!) server, whose communication is + easily fingerprintable; but that doesn't matter because the censor + never sees that part of the communication, only the communication + between the client and CDN. + + One way to think about the difference: if a censor (somehow) learns + the IP address of a bridge as described in this proposal, it's easy + and low-cost for the censor to block that bridge by IP address. meek + aims to make it much more expensive: even if you know a domain is + being used (in part) for circumvention, in order to block it have to + block something important like the Google frontend or CloudFlare + (high collateral damage). + +1. https://trac.torproject.org/projects/tor/wiki/doc/meek -- 1.7.10.4

3 3

Spinning off Directory Archive from Metrics Portal
by Karsten Loesing 07 Jul '14

07 Jul '14

Hello devs, I'm continuously tweaking the Metrics Portal [0] in the attempt to make it more useful. My latest idea is to finally spin off the Directory Archive part from it, which is the part that serves descriptor tarballs. I'd like to hear what people think about that. Let me give you some more context. The Metrics Portal serves three main purposes: 1. Graphs [1]: there are graphs on network size, network diversity, user number estimates, and performance measurements. This is probably what most visitors are interested in. In addition to graphs, there are also tables and .csv files for download. 2. Research [2]: we offer descriptor tarballs for download and explain the data formats. This is mostly interesting for researchers and developers. (This is the part that I'd like to spin off and move to a separate place.) 3. Status [3]: we provided (and still provide) services that are based on archived descriptors. This includes ExoneraTor and Consensus Health, both of which have moved to their own sites, and it includes Relay Search which is high on the list of endangered services. While we (did) provide these services on the Metrics Portal, they're almost gone. So, my plan is to move away the Research part, number 2 above, and re-organize the remaining Graphs part to address visitors who are not necessarily researchers or developers. The new Directory Archive website would contain the following content: - Start page: possibly re-using parts from the current start page [0]. - Data: How to obtain the data, possibly re-using parts from the current Data page [4], but without separate pages for file lists. - Formats: similar to the current Data Formats page [5]. - Tools: similar to the current Tools page [6]. What would be a good name for the new website holding the Tor Directory Archive? How about: - CollecTor, collector.torproject.org (not available yet) or - AggregaTor, aggregator.torproject.org (not available yet) On the software side, I'd like to remove all dynamic (Java) parts from the new website and have it served by Apache alone instead of Tomcat. The only parts that still need to be dynamically generated would be file lists, and I'd like to solve that by using Apache directory listings or some other Apache module. The re-organized Metrics Portal is going to have the following content: - Start page: possibly re-using parts from the current start page [0]. - Graphs: all four sub pages from the current Graphs page [1], so Network, Bubbles, Users, and Performance. - Aggregated data: the processed data behind graphs that is currently available on the Statistics page [7]. Speaking of, if anybody wants to help design the new website (or help re-design the existing Metrics Portal website once the cruft is gone), your help would be much appreciated. Bonus points if no JavaScript is required, at least for the Directory Archive website. Please contact me if you're interested. Any feedback welcome! Thanks! All the best, Karsten [0] https://metrics.torproject.org/ [1] https://metrics.torproject.org/graphs.html [2] https://metrics.torproject.org/research.html [3] https://metrics.torproject.org/status.html [4] https://metrics.torproject.org/data.html [5] https://metrics.torproject.org/formats.html [6] https://metrics.torproject.org/tools.html [7] https://metrics.torproject.org/stats.html

3 6

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

tor-dev June 2014