tor-relays July 2013

tor-relays@lists.torproject.org

55 participants
33 discussions

How does CERT-FI know my SOCKS4 port?
by Steve Snyder 10 Jul '13

10 Jul '13

My ISP recently sent to me a CERT-FI auto-report on malware-infected servers in my ISP's address space. I was send this report because my IP address was among those flagged. My entry looks like this: 51765|aa.bbb.ccc.dd|2013-07-08 02:39:23 +0000|||Proxy|743230|Datasource: C, Type: SOCKS4 (9050) I am wondering how CERT-FI knows about this port. This is a snippet of my relay config: OutboundBindAddress aa.bbb.ccc.dd ORPort [aa.bbb.ccc.dd]:443 DirPort [aa.bbb.ccc.dd]:80 SocksPort [127.0.0.1]:9050 Given that my SOCKS port is bound to localhost, how does CERT-FI know about it? (For more info on the auto-reporter, go to https://www.cert.fi/en/autoreporter/autoreporter.html and log into it with this username/password: auto/reporter) Thanks.

3 2

Unbalanced send/recieve
by Christian 10 Jul '13

10 Jul '13

Hi all, sorry for my probable newbie question. My bridge's log file reads: Jul 10 11:21:34.000 [notice] Heartbeat: Tor's uptime is 17:52 hours, with 4 circuits open. I've sent 12.55 MB and received 209.33 MB. Is it normal to have such an unbalanced ratio or do I have to worry about something? In the past, I always used to recieve a quart more than I sent which I couldn't quite explain, but now... Thanks for an answer. Sincerly christian

3 2

Circuit creation "storms" overwhelming > Raspberry Pi?
by temp5＠tormail.org 09 Jul '13

09 Jul '13

FWIW, I did some tuning on mine (not a pi, but had similar issues) and it seems more stable now too. I added the following to my torrc (where X and Y are your rates/units): MaxOnionsPending 250 BandwidthRate X BandwidthBurst Y RelayBandwidthRate X RelayBandwidthBurst Y I had the RelayBandwidth options already in it, but I read somewhere the added Bandwidth options above should limit directory port traffic bursts. And MaxOnionsPending allows more to queue up before creating errors. It sounds like the next major version of Tor (in release candidate stage right now) has several performance improvements, so you might just want to wait for that to release and see if the problems disappear on their own thanks to the hard work of the developers! > From: Gordon Morehouse <gordon(a)morehouse.me> > > Hi, Yes. This is absolutely on my to-do list. I've had a family > medical emergency and about 2 or 3 other things recently about that > level of stress, but BELIEVE me, a strategy for getting a Raspberry Pi > to be a rock solid relay is of paramount importance to me. > > I'm hoping to figure out all the tweaks I did, and then make an alpha > version of some iptables rules to defend against the "storms," within > the next couple of weeks. > > Please don't hesitate to bug me about this at my direct email. (The old > one is no longer valid, I've dropped pseudonyms on the tor lists.) > > Thanks much, > -Gordon M. > > > Thomas Hand: >> Hi torsion, >> >> I'm also running a tor relay on a raspberry pi and keep getting these >> storm >> creation events which crash the box. You said you made some adjustments >> to >> the configs to get a more stable system? Can you please email me copies >> of >> the configs or maybe list the changes you made? >> I'm trying to get my pi stable and then perhaps role out a few more >> relay >> nodes to friends and colleagues. >> Thanks, >> >> T >> >> >> On 4 May 2013 22:07, <torsion(a)ftml.net> wrote: >> >>> I did a lot of tuning on the Raspberry Pi and it's now much, much more >>> stable as a Tor relay, but just now I had another "circuit creation >>> storm." Interestingly, the Pi remained up, and my *router* crashed. >>> I've also seen huge bursts of circuit creation on a relay I run on a >>> VPS, but as it's a much more powerful box it rarely complains (and thus >>> I rarely notice). >>> >>> This many circuits and outbound connections is highly unusual for the >>> small relay I'm running on the Pi. And this behavior definitely occurs >>> in bursts. Is this an outbound DDOS or an attack on Tor itself? If >>> the >>> former (or maybe the latter), is there some way I could perhaps use >>> iptables to temporarily "clamp" the ability to open TCP connections >>> when >>> Tor (or anything on the Pi) opens a number over some threshold in some >>> short period of time? >>> >>> Here's log output (via 'arm') from the relay after my router crashed >>> twice, I went to the admin panel and noted hundreds of outbound >>> connections from my Tor box. Time is America/Los_Angeles. >>> >>> ? 13:55:00 [ARM_NOTICE] Relay unresponsive (last heartbeat: Sat May 4 >>> 13:54:14 2013) >>> ? 13:52:25 [WARN] Your computer is too slow to handle this many >>> circuit >>> creation >>> ? requests! Please consider using the MaxAdvertisedBandwidth config >>> option or choosing >>> ? a more restricted exit policy. [404 similar message(s) suppressed >>> in last 60 seconds] >>> ? 13:51:07 [WARN] Your computer is too slow to handle this many >>> circuit >>> creation >>> ? requests! Please consider using the MaxAdvertisedBandwidth config >>> option or choosing >>> ? a more restricted exit policy. [75 similar message(s) suppressed >>> in >>> last 60 seconds] >>> ? 13:50:52 [WARN] Your computer is too slow to handle this many >>> circuit >>> creation >>> ? requests! Please consider using the MaxAdvertisedBandwidth config >>> option or choosing >>> ? a more restricted exit policy. [601 similar message(s) suppressed >>> in last 60 seconds] >>> ? 13:48:39 [WARN] Your computer is too slow to handle this many >>> circuit >>> creation >>> ? requests! Please consider using the MaxAdvertisedBandwidth config >>> option or choosing >>> ? a more restricted exit policy. [99 similar message(s) suppressed >>> in >>> last 60 seconds] >>> ? 13:47:34 [WARN] Your computer is too slow to handle this many >>> circuit >>> creation >>> ? requests! Please consider using the MaxAdvertisedBandwidth config >>> option or choosing >>> ? a more restricted exit policy. [22 similar message(s) suppressed >>> in >>> last 60 seconds] >>> ? 13:46:17 [WARN] Your computer is too slow to handle this many >>> circuit >>> creation >>> ? requests! Please consider using the MaxAdvertisedBandwidth config >>> option or choosing >>> ? a more restricted exit policy. [253 similar message(s) suppressed >>> in last 60 seconds] >>> ? 13:43:47 [WARN] Your computer is too slow to handle this many >>> circuit >>> creation >>> ? requests! Please consider using the MaxAdvertisedBandwidth config >>> option or choosing >>> ? a more restricted exit policy. [1396 similar message(s) suppressed >>> in last 60 >>> ? seconds] >>> ? 13:42:48 [WARN] Your computer is too slow to handle this many >>> circuit >>> creation >>> ? requests! Please consider using the MaxAdvertisedBandwidth config >>> option or choosing >>> ? a more restricted exit policy. [16 similar message(s) suppressed >>> in >>> last 60 seconds] >>> >>> Here's how it crashed my router (blowing ip_conntrack limits is >>> sufficient only to mess up many of my TCP connections, but eventually >>> the router runs out of memory and starts killing processes): >>> >>> May 4 13:51:24 dedmaus user.warn kernel: ip_conntrack: table full, >>> dropping packet. >>> May 4 13:51:24 dedmaus user.warn kernel: ip_conntrack: table full, >>> dropping packet. >>> May 4 13:51:24 dedmaus user.warn kernel: ip_conntrack: table full, >>> dropping packet. >>> May 4 13:51:25 dedmaus user.warn kernel: ip_conntrack: table full, >>> dropping packet. >>> May 4 13:51:29 dedmaus user.warn kernel: NET: 152 messages suppressed. >>> May 4 13:51:29 dedmaus user.warn kernel: ip_conntrack: table full, >>> dropping packet. >>> May 4 13:51:34 dedmaus user.warn kernel: NET: 193 messages suppressed. >>> May 4 13:51:34 dedmaus user.warn kernel: ip_conntrack: table full, >>> dropping packet. >>> May 4 13:51:39 dedmaus user.warn kernel: NET: 227 messages suppressed. >>> >>> ...ad infinitum with the number of messages suppressed per 5 sec >>> increasing until the router crashes. >>> >>> >>> >>> On Mon, Mar 18, 2013, at 06:18 PM, torsion(a)ftml.net wrote: >>>> I'm also seeing occasional messages like this on the Pi (it never >>>> lasts >>>> long): >>>> >>>> 18:13:24 [ARM_NOTICE] Relay resumed >>>> 18:13:18 [ARM_NOTICE] Relay unresponsive (last heartbeat: Mon Mar 18 >>>> 18:13:04 2013) >>>> 17:28:43 [ARM_NOTICE] Relay resumed >>>> 17:28:38 [ARM_NOTICE] Relay unresponsive (last heartbeat: Mon Mar 18 >>>> 17:28:25 2013) >>>> 14:12:26 [ARM_NOTICE] Relay resumed >>>> 14:12:20 [ARM_WARN] Deduplication took too long. Its current >>>> implementation has difficulty handling large logs so disabling it to >>>> keep the interface responsive. >>>> 14:12:20 [ARM_NOTICE] Relay unresponsive (last heartbeat: Mon Mar 18 >>>> 14:12:06 20 >>>> >>>> On Mon, Mar 18, 2013, at 01:00 PM, torsion(a)ftml.net wrote: >>>>> Hi there, I just joined the mailing list and apologized if this has >>> been >>>>> discussed before. I did find discussion of a similar issue in >>>>> January >>>>> 2013's archive: >>>>> >>>>> >>> https://lists.torproject.org/pipermail/tor-relays/2013-January/001809.html >>>>> >>>>> It's important to note that I believe I've seen (but didn't save >>>>> logs) >>> a >>>>> couple "circuit creation burst" events on my established relay (about >>>>> 5Mbps, stable, guard, non-exit) which was mostly able to handle it >>>>> without crashing as it has plenty of RAM and the above-mentioned >>>>> messages - "Your computer is too slow to handle this many circuit >>>>> creation requests! Please consider using the MaxAdvertisedBandwidth >>>>> config option or choosing a m ore restricted exit policy." - appear >>> only >>>>> with the relay is under load for other reasons AND a large number of >>>>> circuits are being suddenly created. >>>>> >>>>> I wondered if this was some kind of DOS attempt but didn't think much >>> of >>>>> it because my fast relay continued working fine. >>>>> >>>>> However, I've just set up a Raspberry Pi, the 512MB model, as a relay >>> on >>>>> a slower connection. Here are the relevant settings on this relay: >>>>> >>>>> RelayBandwidthRate 130 KB >>>>> RelayBandwidthBurst 340 KB >>>>> >>>>> The Pi has a fairly slow CPU, so I'd occasionally get messages about >>> log >>>>> deduplication being too slow or something, but didn't think much of >>>>> it. >>>>> I finally got the relay up and left it up for over 24 hours. When I >>>>> woke up this morning it had crashed. Here are the relevant log >>> messages >>>>> - note the huge jump in number of circuits between 22:35 and 04:35 >>>>> (maybe I got the Stable flag), then the storm of circuit open >>>>> requests >>>>> starting at 05:49. Eventually I believe the Pi ran out of memory and >>>>> killed the tor process. >>>>> >>>>> What's very interesting here is that my fast VPS relay with a >>>>> RelayBandwidthRate over 5x faster is almost never handling much more >>>>> than 1000 circuits, so why all of a sudden the demand on the Pi >>>>> that's >>>>> advertising a lower bandwidth rate? >>>>> >>>>> Mar 17 22:35:00.000 [notice] Heartbeat: Tor's uptime is 1 day 0:00 >>>>> hours, with 26 circuits open. I've sent 974.13 MB and received 969.92 >>>>> MB. >>>>> Mar 18 04:35:00.000 [notice] Heartbeat: Tor's uptime is 1 day 6:00 >>>>> hours, with 972 circuits open. I've sent 1.61 GB and received 1.59 >>>>> GB. >>>>> Mar 18 05:49:44.000 [warn] Your computer is too slow to handle this >>> many >>>>> circuit creation requests! Please consider using the >>>>> MaxAdvertisedBandwidth config option or choosing a more restricted >>>>> exit >>>>> policy. >>>>> Mar 18 05:49:44.000 [warn] Failed to hand off onionskin. Closing. >>>>> Mar 18 05:50:44.000 [warn] Your computer is too slow to handle this >>> many >>>>> circuit creation requests! Please consider using the >>>>> MaxAdvertisedBandwidth config option or choosing a more restricted >>>>> exit >>>>> policy. [5817 similar message(s) suppressed in last 60 seconds] >>>>> Mar 18 05:52:30.000 [warn] Your system clock just jumped 101 seconds >>>>> forward; assuming established circuits no longer work. >>>>> Mar 18 05:53:51.000 [warn] Your computer is too slow to handle this >>> many >>>>> circuit creation requests! Please consider using the >>>>> MaxAdvertisedBandwidth config option or choosing a more restricted >>>>> exit >>>>> policy. [1055 similar message(s) suppressed in last 60 seconds] >>>>> Mar 18 05:55:14.000 [warn] Your computer is too slow to handle this >>> many >>>>> circuit creation requests! Please consider using the >>>>> MaxAdvertisedBandwidth config option or choosing a more restricted >>>>> exit >>>>> policy. [329 similar message(s) suppressed in last 60 seconds] >>>>> >>>>> I'd like to figure out just how much the Raspberry Pi is capable of, >>>>> because it could be a cheap way to build out the relay network by >>> people >>>>> who want to donate bandwidth - but of course it needs to be stable, >>>>> and >>>>> something about my setup is not. >>>>> >>>>> Also: >>>>> >>>>> Mar 16 20:55:33.000 [notice] No AES engine found; using AES_* >>> functions. >>>>> >>>>> I have no idea if the Broadcom BCM2835 SoC (ARM1176JZF-S CPU) in the >>>>> Pi >>>>> has any AES capability, but it'd be great to find out. >>>>> >>>>> _______________________________________________ >>>>> tor-relays mailing list >>>>> tor-relays(a)lists.torproject.org >>>>> https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays >>> _______________________________________________ >>> tor-relays mailing list >>> tor-relays(a)lists.torproject.org >>> https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays >>> >> >> >> >> _______________________________________________ >> tor-relays mailing list >> tor-relays(a)lists.torproject.org >> https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays >> > >

1 0

Relay identity
by Jochen 08 Jul '13

08 Jul '13

Hello, I want to create a Raspberry PI image with preinstalled TOR relay for some friends. I will also include a config script to customize torrc (Nickname etc.). I also need to generate a new identity key in this script, so that every node is unique. But I don't know how to generate a new identity. Is there a command to do that, or must I remove /var/lib/*tor*/keys/?

2 1

Circuit creation "storms" overwhelming Raspberry Pi?
by torsion＠ftml.net 08 Jul '13

08 Jul '13

Hi there, I just joined the mailing list and apologized if this has been discussed before. I did find discussion of a similar issue in January 2013's archive: https://lists.torproject.org/pipermail/tor-relays/2013-January/001809.html It's important to note that I believe I've seen (but didn't save logs) a couple "circuit creation burst" events on my established relay (about 5Mbps, stable, guard, non-exit) which was mostly able to handle it without crashing as it has plenty of RAM and the above-mentioned messages - "Your computer is too slow to handle this many circuit creation requests! Please consider using the MaxAdvertisedBandwidth config option or choosing a m ore restricted exit policy." - appear only with the relay is under load for other reasons AND a large number of circuits are being suddenly created. I wondered if this was some kind of DOS attempt but didn't think much of it because my fast relay continued working fine. However, I've just set up a Raspberry Pi, the 512MB model, as a relay on a slower connection. Here are the relevant settings on this relay: RelayBandwidthRate 130 KB RelayBandwidthBurst 340 KB The Pi has a fairly slow CPU, so I'd occasionally get messages about log deduplication being too slow or something, but didn't think much of it. I finally got the relay up and left it up for over 24 hours. When I woke up this morning it had crashed. Here are the relevant log messages - note the huge jump in number of circuits between 22:35 and 04:35 (maybe I got the Stable flag), then the storm of circuit open requests starting at 05:49. Eventually I believe the Pi ran out of memory and killed the tor process. What's very interesting here is that my fast VPS relay with a RelayBandwidthRate over 5x faster is almost never handling much more than 1000 circuits, so why all of a sudden the demand on the Pi that's advertising a lower bandwidth rate? Mar 17 22:35:00.000 [notice] Heartbeat: Tor's uptime is 1 day 0:00 hours, with 26 circuits open. I've sent 974.13 MB and received 969.92 MB. Mar 18 04:35:00.000 [notice] Heartbeat: Tor's uptime is 1 day 6:00 hours, with 972 circuits open. I've sent 1.61 GB and received 1.59 GB. Mar 18 05:49:44.000 [warn] Your computer is too slow to handle this many circuit creation requests! Please consider using the MaxAdvertisedBandwidth config option or choosing a more restricted exit policy. Mar 18 05:49:44.000 [warn] Failed to hand off onionskin. Closing. Mar 18 05:50:44.000 [warn] Your computer is too slow to handle this many circuit creation requests! Please consider using the MaxAdvertisedBandwidth config option or choosing a more restricted exit policy. [5817 similar message(s) suppressed in last 60 seconds] Mar 18 05:52:30.000 [warn] Your system clock just jumped 101 seconds forward; assuming established circuits no longer work. Mar 18 05:53:51.000 [warn] Your computer is too slow to handle this many circuit creation requests! Please consider using the MaxAdvertisedBandwidth config option or choosing a more restricted exit policy. [1055 similar message(s) suppressed in last 60 seconds] Mar 18 05:55:14.000 [warn] Your computer is too slow to handle this many circuit creation requests! Please consider using the MaxAdvertisedBandwidth config option or choosing a more restricted exit policy. [329 similar message(s) suppressed in last 60 seconds] I'd like to figure out just how much the Raspberry Pi is capable of, because it could be a cheap way to build out the relay network by people who want to donate bandwidth - but of course it needs to be stable, and something about my setup is not. Also: Mar 16 20:55:33.000 [notice] No AES engine found; using AES_* functions. I have no idea if the Broadcom BCM2835 SoC (ARM1176JZF-S CPU) in the Pi has any AES capability, but it'd be great to find out.

3 4

Re: [tor-relays] stats
by Armand 07 Jul '13

07 Jul '13

Sent from my Cricket smart phone ma455(a)mykolab.com wrote: >hello, >i'm running an exit node from 2 or 3 month, in UA, on a vps, xeon 2650 >2Ghz, 128mb RAM, debian 6 >tor v0.2.3.25-1 > > >on atlas there is some stat on those days it's seem to be at max 100Kb/s > > > > > > > >//atlas.torproject.org/#details/62C3FB37C44555E55A62BBD7CDDD97FE4894F317 > >but on arm or with iftop i'm beetween 300 and 900Kb/s download and the >same in upload > >my load average is 4.74, 2.97, 2.98 >there is just tor on this server > >this append form the beguining, > >there is a problem? who is right? can you help me to verify if my node >is fine configured? > > >thanks > >PS: sorry for my english is not my first language >_______________________________________________ >tor-relays mailing list >tor-relays(a)lists.torproject.org >https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays

3 2

stats
by ma455＠mykolab.com 07 Jul '13

07 Jul '13

hello, i'm running an exit node from 2 or 3 month, in UA, on a vps, xeon 2650 2Ghz, 128mb RAM, debian 6 tor v0.2.3.25-1 on atlas there is some stat on those days it's seem to be at max 100Kb/s //atlas.torproject.org/#details/62C3FB37C44555E55A62BBD7CDDD97FE4894F317 but on arm or with iftop i'm beetween 300 and 900Kb/s download and the same in upload my load average is 4.74, 2.97, 2.98 there is just tor on this server this append form the beguining, there is a problem? who is right? can you help me to verify if my node is fine configured? thanks PS: sorry for my english is not my first language

2 2

Re: [tor-relays] stats
by Armand 07 Jul '13

07 Jul '13

1 0

Address mismatch on received DNS packet
by TonyXue 05 Jul '13

05 Jul '13

Hi Everyone, I've just started to run a tor relay these days. But there are many warnings like this in my log file. Jul 05 11:25:19.000 [warn] eventdns: Address mismatch on received DNS packet. Apparent source was 66.80.130.234:53Jul 05 11:25:38.000 [warn] eventdns: Address mismatch on received DNS packet. Apparent source was 66.80.130.235:53Jul 05 11:25:42.000 [warn] eventdns: Address mismatch on received DNS packet. Apparent source was 66.80.130.235:53Jul 05 11:32:18.000 [warn] eventdns: Address mismatch on received DNS packet. Apparent source was 66.80.130.235:53Jul 05 11:32:18.000 [warn] eventdns: Address mismatch on received DNS packet. Apparent source was 66.80.130.235:53Jul 05 11:32:18.000 [warn] eventdns: Address mismatch on received DNS packet. Apparent source was 66.80.130.234:53Jul 05 11:32:18.000 [warn] eventdns: Address mismatch on received DNS packet. Apparent source was 66.80.130.234:53Jul 05 11:32:23.000 [warn] eventdns: Address mismatch on received DNS packet. Apparent source was 66.80.130.236:53Jul 05 11:39:14.000 [warn] eventdns: Address mismatch on received DNS packet. Apparent source was 66.80.130.235:53Jul 05 11:39:48.000 [warn] eventdns: Address mismatch on received DNS packet. Apparent source was 66.80.130.235:53Jul 05 11:39:48.000 [warn] eventdns: Address mismatch on received DNS packet. Apparent source was 66.80.130.235:53Jul 05 11:39:48.000 [warn] eventdns: Address mismatch on received DNS packet. Apparent source was 66.80.130.235:53Jul 05 11:39:48.000 [warn] eventdns: Address mismatch on received DNS packet. Apparent source was 66.80.130.234:53Jul 05 11:39:48.000 [warn] eventdns: Address mismatch on received DNS packet. Apparent source was 66.80.130.236:53Jul 05 11:39:53.000 [warn] eventdns: Address mismatch on received DNS packet. Apparent source was 66.80.130.234:53Jul 05 11:39:53.000 [warn] eventdns: Address mismatch on received DNS packet. Apparent source was 66.80.130.234:53Jul 05 11:39:58.000 [warn] eventdns: Address mismatch on received DNS packet. Apparent source was 66.80.130.235:53 Also with some warnings: Jul 05 12:36:58.000 [warn] eventdns: All nameservers have failedJul 05 12:36:58.000 [notice] eventdns: Nameserver 64.81.45.2:53 is back up Is the nameservers mentioned above are set to be Tor's resolvers? If they are, where can I change the settings of DNS servers? Hope someone can help me with this... Thanks a lot.

3 2

Vidalia can't open Tor after machine restart
by Shane Nagle 04 Jul '13

04 Jul '13

Hello Tor team! And thanks so much for doing what you do. I have a novice/newbie question. Perhaps you could point me to the best source of problem solving data/info you have regarding it. My problem is: after successfully downloading TBB 64bit, and having the browser work very well all day, I shut down my machine at night, then restart the next day only to find that Vidalia cannot open Tor. I've done this four times now. The 'temporary solution' each time was to uninstall, re-download and install TBB again. However the same errors would occur the following morning. I see this: in the fIrefox interface - Firefox is configured to use a proxy server that is refusing connections. And in the Vidalia pane: Vidalia was unable to connect to Tor. (Connection refused by peer.) I have sent several emails to the Tor mailing lists but so far have heard no reply or seen any posting of my inquiry. Any support would be appreciated. S

2 1

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

tor-relays July 2013