I'm attempting to run a Relay but I haven't been able to get it the ORPort to be confirm as reachable. I've tried lots of things but I'm hoping there is something I haven't thought of yet that can make this work! I've got a 50Mbps symmetrical connection (without data caps) that I would love to have the Tor network utilize.
Hardware info: - Asus RT-N66U running DD-WRT - Raspberry Pi 2 running Raspbian - SanDisk MicroSDHC UHS-I 16GB
Here are all the steps I've taken: - Formatted the MicroSDHC with Win32DiskImager. - Followed the Instructables Raspberry Pi Tor Relay configuration guide. - Port forwarded via NAT/QoS then Port Forwarding. Protocol is set to TCP, double-checked IP is what is assigned to Raspberry Pi 2 and enable box is checked. - ORPort set to 9001. Also changed ORPort to 443, did "sudo service tor reload" and changed the port in the forwarding section of my router. - Tried router DMZ for Raspberry Pi LAN IP.
I would really like to get this to work, if possible. I can't run an Exit node on my connection but since my connection sits unused for most of the day it should be put to good relay use.