On 1 Sep 2016, at 12:07, Marina Brown catskillmarina@gmail.com wrote:
Hi All:
I've set up a new relay and it is not showing up on Atlas. This is the Log output.
Sep 01 03:52:27.000 [notice] Bootstrapped 90%: Establishing a Tor circuit Sep 01 03:52:27.000 [notice] Tor has successfully opened a circuit. Looks like client functionality is wor king. Sep 01 03:52:27.000 [notice] Bootstrapped 100%: Done Sep 01 03:52:27.000 [notice] Now checking whether ORPort 78.47.167.67:9001 is reachable... (this may take up to 20 minutes -- look for log messages indicating success) Sep 01 03:52:27.000 [notice] Self-testing indicates your ORPort is reachable from the outside. Excellent. Publishing server descriptor. Sep 01 03:53:28.000 [notice] Performing bandwidth self-test…done.
It looks like you might have set up your relay in the last hour.
Your relay did make it into the consensus for this hour (large page): https://consensus-health.torproject.org/consensus-health-2016-09-01-01-00.ht...
It just takes Atlas a little while to update.
Here's what the process looks like: The Tor authorities vote every hour at 50-55 minutes past the hour. Then they produce a consensus on the hour. Then Onionoo updates. Then Atlas uses Onionoo for the relay data.
Wait half an hour, and check Atlas again.
Tim
## Configuration file for a typical Tor user ## Last updated 9 October 2013 for Tor 0.2.5.2-alpha. ## (may or may not work for much older or much newer versions of Tor.) ## ## Lines that begin with "## " try to explain what's going on. Lines ## that begin with just "#" are disabled commands: you can enable them ## by removing the "#" symbol. ## ## See 'man tor', or https://www.torproject.org/docs/tor-manual.html, ## for more options you can use in this file. ## ## Tor will look for this file in various places based on your platform: ## https://www.torproject.org/docs/faq#torrc
## Tor opens a socks proxy on port 9050 by default -- even if you don't ## configure one below. Set "SocksPort 0" if you plan to run Tor only ## as a relay, and not make any local application connections yourself. #SocksPort 9050 # Default: Bind to localhost:9050 for local connections. #SocksPort 192.168.0.1:9100 # Bind to this address:port too.
## Entry policies to allow/deny SOCKS requests based on IP address. ## First entry that matches wins. If no SocksPolicy is set, we accept ## all (and only) requests that reach a SocksPort. Untrusted users who ## can access your SocksPort may be able to learn about the connections ## you make. #SocksPolicy accept 192.168.0.0/16 #SocksPolicy reject * ## Logs go to stdout at level "notice" unless redirected by something ## else, like one of the below lines. You can have as many Log lines as ## you want. ## ## We advise using "notice" in most cases, since anything more verbose ## may provide sensitive information to an attacker who obtains the logs. ## ## Send all messages of level 'notice' or higher to /var/log/tor/notices.log #Log notice file /var/log/tor/notices.log ## Send every possible message to /var/log/tor/debug.log #Log debug file /var/log/tor/debug.log ## Use the system log instead of Tor's logfiles #Log notice syslog ## To send all messages to stderr: #Log debug stderr
## Uncomment this to start the process in the background... or use ## --runasdaemon 1 on the command line. This is ignored on Windows; ## see the FAQ entry if you want Tor to run as an NT service. #RunAsDaemon 1
## The directory for keeping all the keys/etc. By default, we store ## things in $HOME/.tor on Unix, and in Application Data\tor on Windows. #DataDirectory /var/lib/tor
## The port on which Tor will listen for local connections from Tor ## controller applications, as documented in control-spec.txt. #ControlPort 9051 ## If you enable the controlport, be sure to enable one of these ## authentication methods, to prevent attackers from accessing it. #HashedControlPassword 16:872860B76453A77D60CA2BB8C1A7042072093276A3D701AD684053EC4C #CookieAuthentication 1
############### This section is just for location-hidden services ###
## Once you have configured a hidden service, you can look at the ## contents of the file ".../hidden_service/hostname" for the address ## to tell people. ## ## HiddenServicePort x y:z says to redirect requests on port x to the ## address y:z.
#HiddenServiceDir /var/lib/tor/hidden_service/ #HiddenServicePort 80 127.0.0.1:80
#HiddenServiceDir /var/lib/tor/other_hidden_service/ #HiddenServicePort 80 127.0.0.1:80 #HiddenServicePort 22 127.0.0.1:22
# XXXXXXXXXXXXXXXXXXXX HiddenServiceDir /var/lib/tor/XXXXXXXXX/ HiddenServicePort 80 127.0.0.1:80
################ This section is just for relays ##################### # ## See https://www.torproject.org/docs/tor-doc-relay for details.
## Required: what port to advertise for incoming Tor connections. ORPort 9001 ## If you want to listen on a port other than the one advertised in ## ORPort (e.g. to advertise 443 but bind to 9090), you can do it as ## follows. You'll need to do ipchains or other port forwarding ## yourself to make this work. #ORPort 443 NoListen #ORPort 127.0.0.1:9090 NoAdvertise
## The IP address or full DNS name for incoming connections to your ## relay. Leave commented out and Tor will guess. #Address noname.example.com
## If you have multiple network interfaces, you can specify one for ## outgoing traffic to use. # OutboundBindAddress 10.0.0.5
## A handle for your relay, so people don't have to refer to it by key. Nickname greedygertie
## Define these to limit how much relayed traffic you will allow. Your ## own traffic is still unthrottled. Note that RelayBandwidthRate must ## be at least 20 KB. ## Note that units for these config options are bytes per second, not bits ## per second, and that prefixes are binary prefixes, i.e. 2^10, 2^20, etc. RelayBandwidthRate 100 KB # Throttle traffic to 100KB/s (800Kbps) RelayBandwidthBurst 200 KB # But allow bursts up to 200KB/s (1600Kbps)
## Use these to restrict the maximum traffic per day, week, or month. ## Note that this threshold applies separately to sent and received bytes, ## not to their sum: setting "4 GB" may allow up to 8 GB total before ## hibernating. ## ## Set a maximum of 4 gigabytes each way per period. #AccountingMax 4 GB ## Each period starts daily at midnight (AccountingMax is per day) #AccountingStart day 00:00 ## Each period starts on the 3rd of the month at 15:00 (AccountingMax ## is per month) #AccountingStart month 3 15:00
## Administrative contact information for this relay or bridge. This line ## can be used to contact you if your relay or bridge is misconfigured or ## something else goes wrong. Note that we archive and publish all ## descriptors containing these lines and that Google indexes them, so ## spammers might also collect them. You may want to obscure the fact that ## it's an email address and/or generate a new address for this purpose. #ContactInfo Random Person <nobody AT example dot com> ## You might also include your PGP or GPG fingerprint if you have one: #ContactInfo 0xFFFFFFFF Random Person <nobody AT example dot com> ContactInfo 0x4D9C031B Marina Brown catskillmarina@gmail.com
## Uncomment this to mirror directory information for others. Please do ## if you have enough bandwidth. #DirPort 9030 # what port to advertise for directory connections ## If you want to listen on a port other than the one advertised in ## DirPort (e.g. to advertise 80 but bind to 9091), you can do it as ## follows. below too. You'll need to do ipchains or other port ## forwarding yourself to make this work. #DirPort 80 NoListen #DirPort 127.0.0.1:9091 NoAdvertise ## Uncomment to return an arbitrary blob of html on your DirPort. Now you ## can explain what Tor is if anybody wonders why your IP address is ## contacting them. See contrib/tor-exit-notice.html in Tor's source ## distribution for a sample. #DirPortFrontPage /etc/tor/tor-exit-notice.html
## Uncomment this if you run more than one Tor relay, and add the identity ## key fingerprint of each Tor relay you control, even if they're on ## different networks. You declare it here so Tor clients can avoid ## using more than one of your relays in a single circuit. See ## https://www.torproject.org/docs/faq#MultipleRelays ## However, you should never include a bridge's fingerprint here, as it would ## break its concealability and potentionally reveal its IP/TCP address. #MyFamily $keyid,$keyid,...
## A comma-separated list of exit policies. They're considered first ## to last, and the first match wins. If you want to _replace_ ## the default exit policy, end this with either a reject *:* or an ## accept *:*. Otherwise, you're _augmenting_ (prepending to) the ## default exit policy. Leave commented to just use the default, which is ## described in the man page or at ## https://www.torproject.org/documentation.html ## ## Look at https://www.torproject.org/faq-abuse.html#TypicalAbuses ## for issues you might encounter if you use the default exit policy. ## ## If certain IPs and ports are blocked externally, e.g. by your firewall, ## you should update your exit policy to reflect this -- otherwise Tor ## users will be told that those destinations are down. ## ## For security, by default Tor rejects connections to private (local) ## networks, including to your public IP address. See the man page entry ## for ExitPolicyRejectPrivate if you want to allow "exit enclaving". ## #ExitPolicy accept *:6660-6667,reject *:* # allow irc ports but no more #ExitPolicy accept *:119 # accept nntp as well as default exit policy ExitPolicy reject *:*
## Bridge relays (or "bridges") are Tor relays that aren't listed in the ## main directory. Since there is no complete public list of them, even an ## ISP that filters connections to all the known Tor relays probably ## won't be able to block all the bridges. Also, websites won't treat you ## differently because they won't know you're running Tor. If you can ## be a real relay, please do; but if not, be a bridge! #BridgeRelay 1 ## By default, Tor will advertise your bridge to users through various ## mechanisms like https://bridges.torproject.org/. If you want to run ## a private bridge, for example because you'll give out your bridge ## address manually to your friends, uncomment this line: #PublishServerDescriptor 0
# more fingerprint greedygertie 27376BCE3867E999330C53981FA0A226870F042F
greedygertie is not showing up on atlas
--- Marina
tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
Tim Wilson-Brown (teor)
teor2345 at gmail dot com PGP C855 6CED 5D90 A0C5 29F6 4D43 450C BA7F 968F 094B ricochet:ekmygaiu4rzgsk6n xmpp: teor at torproject dot org