Dear helpers! Nyx says that my relay is unresponsive and that it was resumed. As I write this mail I have already 334 duplicates hidden. What's my problem and how can I solve this? The relay runs on a Raspberry Pi and is connected via LAN. Yours Digitalist
[Unbenannt.JPG]
Sent with [ProtonMail](https://protonmail.com) Secure Email.
What does top say? CPU 100% and/or ram full?
On 9. Mar 2019, at 20:14, digitalist00 digitalist00@protonmail.com wrote:
Dear helpers! Nyx says that my relay is unresponsive and that it was resumed. As I write this mail I have already 334 duplicates hidden. What's my problem and how can I solve this? The relay runs on a Raspberry Pi and is connected via LAN. Yours Digitalist
<Unbenannt.JPG>
Sent with ProtonMail https://protonmail.com/ Secure Email.
tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
No no: CPU is about 10 - 15 % an RAM (mem) at about 15 % too (143 MB).
Sent with [ProtonMail](https://protonmail.com) Secure Email.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ Am Samstag, 9. März 2019 21:14 schrieb niftybunny abuse@to-surf-and-protect.net:
What does top say? CPU 100% and/or ram full?
On 9. Mar 2019, at 20:14, digitalist00 digitalist00@protonmail.com wrote:
Dear helpers! Nyx says that my relay is unresponsive and that it was resumed. As I write this mail I have already 334 duplicates hidden. What's my problem and how can I solve this? The relay runs on a Raspberry Pi and is connected via LAN. Yours Digitalist
<Unbenannt.JPG>
Sent with [ProtonMail](https://protonmail.com/) Secure Email.
tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
Next step: try LimitNOFILE = 1000
On 9. Mar 2019, at 23:20, digitalist00 digitalist00@protonmail.com wrote:
No no: CPU is about 10 - 15 % an RAM (mem) at about 15 % too (143 MB).
Sent with ProtonMail https://protonmail.com/ Secure Email.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ Am Samstag, 9. März 2019 21:14 schrieb niftybunny abuse@to-surf-and-protect.net:
What does top say? CPU 100% and/or ram full?
On 9. Mar 2019, at 20:14, digitalist00 <digitalist00@protonmail.com mailto:digitalist00@protonmail.com> wrote:
Dear helpers! Nyx says that my relay is unresponsive and that it was resumed. As I write this mail I have already 334 duplicates hidden. What's my problem and how can I solve this? The relay runs on a Raspberry Pi and is connected via LAN. Yours Digitalist
<Unbenannt.JPG>
Sent with ProtonMail https://protonmail.com/ Secure Email.
tor-relays mailing list tor-relays@lists.torproject.org mailto:tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
Is this a command?
Sent with [ProtonMail](https://protonmail.com) Secure Email.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ Am Samstag, 9. März 2019 23:22 schrieb niftybunny abuse@to-surf-and-protect.net:
Next step: try LimitNOFILE = 1000
On 9. Mar 2019, at 23:20, digitalist00 digitalist00@protonmail.com wrote:
No no: CPU is about 10 - 15 % an RAM (mem) at about 15 % too (143 MB).
Sent with [ProtonMail](https://protonmail.com/) Secure Email.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ Am Samstag, 9. März 2019 21:14 schrieb niftybunny abuse@to-surf-and-protect.net:
What does top say? CPU 100% and/or ram full?
On 9. Mar 2019, at 20:14, digitalist00 digitalist00@protonmail.com wrote:
Dear helpers! Nyx says that my relay is unresponsive and that it was resumed. As I write this mail I have already 334 duplicates hidden. What's my problem and how can I solve this? The relay runs on a Raspberry Pi and is connected via LAN. Yours Digitalist
<Unbenannt.JPG>
Sent with [ProtonMail](https://protonmail.com/) Secure Email.
tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
Ups sorry, its in your torrc. You can modify how many relays can connect to your relay.
its in your torrc file
mine looks something like this:
SocksPort 0 # disable local usage CookieAuthentication 1 # method for controller authentication ORPort 21001 # ORPort angepasst DirPort 11001 # DirPort angepasst Nickname niftycastoroides # Solltest du auf jeden Fall anpassen ContactInfo abuse@to-surf-and-protect.net # Solltest du auf jeden Fall anpassen RelayBandwidthRate 100 MB # Bandbreite die du zur Verfügung stellst RelayBandwidthBurst 100 MB # Bandbreite die du zur Verfügung stells MaxMemInQueues 1024 MB # DDOS ExitRelay 0 # This is an Exit # ORPort [2a01:4f9:2a:98c:0000:0000:50cf:a8ba]:21001
Try to limit you men usage with MaxMemInQueues 1024 MB and your connection LimitNOFile 5000 or something like this. Its mostly try and error how much a Pie can handle. In my experience: ARM mostly suxx with AES and thats the most important part of a Tor relay. Just try different settings :)
On 9. Mar 2019, at 23:24, digitalist00 digitalist00@protonmail.com wrote:
Is this a command?
Sent with ProtonMail https://protonmail.com/ Secure Email.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ Am Samstag, 9. März 2019 23:22 schrieb niftybunny abuse@to-surf-and-protect.net:
Next step: try LimitNOFILE = 1000
On 9. Mar 2019, at 23:20, digitalist00 <digitalist00@protonmail.com mailto:digitalist00@protonmail.com> wrote:
No no: CPU is about 10 - 15 % an RAM (mem) at about 15 % too (143 MB).
Sent with ProtonMail https://protonmail.com/ Secure Email.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ Am Samstag, 9. März 2019 21:14 schrieb niftybunny <abuse@to-surf-and-protect.net mailto:abuse@to-surf-and-protect.net>:
What does top say? CPU 100% and/or ram full?
On 9. Mar 2019, at 20:14, digitalist00 <digitalist00@protonmail.com mailto:digitalist00@protonmail.com> wrote:
Dear helpers! Nyx says that my relay is unresponsive and that it was resumed. As I write this mail I have already 334 duplicates hidden. What's my problem and how can I solve this? The relay runs on a Raspberry Pi and is connected via LAN. Yours Digitalist
<Unbenannt.JPG>
Sent with ProtonMail https://protonmail.com/ Secure Email.
tor-relays mailing list tor-relays@lists.torproject.org mailto:tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
tor-relays mailing list tor-relays@lists.torproject.org mailto:tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
MaxMemInQueues 1024 MB hab ich eingetragen. LimitNOFile 5000 - geht nicht. LimitNOFILE = 5000 - geht auch nicht, hab's daher wieder gelöscht und Tor wieder neu gestartet.
Jetzt startet Nyx nich mehr. Kann also nicht sagen, ob Tor jetzt läuft oder nicht.
Sent with [ProtonMail](https://protonmail.com) Secure Email.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ Am Samstag, 9. März 2019 23:30 schrieb niftybunny abuse@to-surf-and-protect.net:
Ups sorry, its in your torrc. You can modify how many relays can connect to your relay.
its in your torrc file
mine looks something like this:
SocksPort 0 # disable local usage CookieAuthentication 1 # method for controller authentication ORPort 21001 # ORPort angepasst DirPort 11001 # DirPort angepasst Nickname niftycastoroides # Solltest du auf jeden Fall anpassen ContactInfo abuse@to-surf-and-protect.net # Solltest du auf jeden Fall anpassen RelayBandwidthRate 100 MB # Bandbreite die du zur Verfügung stellst RelayBandwidthBurst 100 MB # Bandbreite die du zur Verfügung stells MaxMemInQueues 1024 MB # DDOS ExitRelay 0 # This is an Exit # ORPort [2a01:4f9:2a:98c:0000:0000:50cf:a8ba]:21001
Try to limit you men usage with MaxMemInQueues 1024 MB and your connection LimitNOFile 5000 or something like this. Its mostly try and error how much a Pie can handle. In my experience: ARM mostly suxx with AES and thats the most important part of a Tor relay. Just try different settings :)
On 9. Mar 2019, at 23:24, digitalist00 digitalist00@protonmail.com wrote:
Is this a command?
Sent with [ProtonMail](https://protonmail.com/) Secure Email.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ Am Samstag, 9. März 2019 23:22 schrieb niftybunny abuse@to-surf-and-protect.net:
Next step: try LimitNOFILE = 1000
On 9. Mar 2019, at 23:20, digitalist00 digitalist00@protonmail.com wrote:
No no: CPU is about 10 - 15 % an RAM (mem) at about 15 % too (143 MB).
Sent with [ProtonMail](https://protonmail.com/) Secure Email.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ Am Samstag, 9. März 2019 21:14 schrieb niftybunny abuse@to-surf-and-protect.net:
What does top say? CPU 100% and/or ram full?
On 9. Mar 2019, at 20:14, digitalist00 digitalist00@protonmail.com wrote:
Dear helpers! Nyx says that my relay is unresponsive and that it was resumed. As I write this mail I have already 334 duplicates hidden. What's my problem and how can I solve this? The relay runs on a Raspberry Pi and is connected via LAN. Yours Digitalist
<Unbenannt.JPG>
Sent with [ProtonMail](https://protonmail.com/) Secure Email.
tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
OK: chown <datei in der authcookie liegt> hat's gebracht. Nyx läuft wieder, Tor auch. Das mit LimitNOFILE ist mir noch nicht ganz klar.
Sent with [ProtonMail](https://protonmail.com) Secure Email.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ Am Samstag, 9. März 2019 23:45 schrieb digitalist00 digitalist00@protonmail.com:
MaxMemInQueues 1024 MB hab ich eingetragen. LimitNOFile 5000 - geht nicht. LimitNOFILE = 5000 - geht auch nicht, hab's daher wieder gelöscht und Tor wieder neu gestartet.
Jetzt startet Nyx nich mehr. Kann also nicht sagen, ob Tor jetzt läuft oder nicht.
Sent with [ProtonMail](https://protonmail.com) Secure Email.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ Am Samstag, 9. März 2019 23:30 schrieb niftybunny abuse@to-surf-and-protect.net:
Ups sorry, its in your torrc. You can modify how many relays can connect to your relay.
its in your torrc file
mine looks something like this:
SocksPort 0 # disable local usage CookieAuthentication 1 # method for controller authentication ORPort 21001 # ORPort angepasst DirPort 11001 # DirPort angepasst Nickname niftycastoroides # Solltest du auf jeden Fall anpassen ContactInfo abuse@to-surf-and-protect.net # Solltest du auf jeden Fall anpassen RelayBandwidthRate 100 MB # Bandbreite die du zur Verfügung stellst RelayBandwidthBurst 100 MB # Bandbreite die du zur Verfügung stells MaxMemInQueues 1024 MB # DDOS ExitRelay 0 # This is an Exit # ORPort [2a01:4f9:2a:98c:0000:0000:50cf:a8ba]:21001
Try to limit you men usage with MaxMemInQueues 1024 MB and your connection LimitNOFile 5000 or something like this. Its mostly try and error how much a Pie can handle. In my experience: ARM mostly suxx with AES and thats the most important part of a Tor relay. Just try different settings :)
On 9. Mar 2019, at 23:24, digitalist00 digitalist00@protonmail.com wrote:
Is this a command?
Sent with [ProtonMail](https://protonmail.com/) Secure Email.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ Am Samstag, 9. März 2019 23:22 schrieb niftybunny abuse@to-surf-and-protect.net:
Next step: try LimitNOFILE = 1000
On 9. Mar 2019, at 23:20, digitalist00 digitalist00@protonmail.com wrote:
No no: CPU is about 10 - 15 % an RAM (mem) at about 15 % too (143 MB).
Sent with [ProtonMail](https://protonmail.com/) Secure Email.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ Am Samstag, 9. März 2019 21:14 schrieb niftybunny abuse@to-surf-and-protect.net:
What does top say? CPU 100% and/or ram full?
> On 9. Mar 2019, at 20:14, digitalist00 digitalist00@protonmail.com wrote: > > Dear helpers! > Nyx says that my relay is unresponsive and that it was resumed. As I write this mail I have already 334 duplicates hidden. > What's my problem and how can I solve this? > The relay runs on a Raspberry Pi and is connected via LAN. > Yours > Digitalist > > <Unbenannt.JPG> > > Sent with [ProtonMail](https://protonmail.com/) Secure Email. > > _______________________________________________ > tor-relays mailing list > tor-relays@lists.torproject.org > https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
Sorry, germin because of your torrc-example: I added MaxMemInQueues 1024 MB LimitNOFile 5000 doesn't work, neither does LimitNOFILE = 5000 and I deleted it. Nyx didn't start anymore and then I first had to "chown <authcookie-file>". Tor is running again and nyx says "Relay unresponsive - Relay resumed - 3, no 4 duplicates hidden. I have traffic, some flags and everything seems fine except those nyx-notices.
Sent with [ProtonMail](https://protonmail.com) Secure Email.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ Am Samstag, 9. März 2019 23:49 schrieb digitalist00 digitalist00@protonmail.com:
OK: chown <datei in der authcookie liegt> hat's gebracht. Nyx läuft wieder, Tor auch. Das mit LimitNOFILE ist mir noch nicht ganz klar.
Sent with [ProtonMail](https://protonmail.com) Secure Email.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ Am Samstag, 9. März 2019 23:45 schrieb digitalist00 digitalist00@protonmail.com:
MaxMemInQueues 1024 MB hab ich eingetragen. LimitNOFile 5000 - geht nicht. LimitNOFILE = 5000 - geht auch nicht, hab's daher wieder gelöscht und Tor wieder neu gestartet.
Jetzt startet Nyx nich mehr. Kann also nicht sagen, ob Tor jetzt läuft oder nicht.
Sent with [ProtonMail](https://protonmail.com) Secure Email.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ Am Samstag, 9. März 2019 23:30 schrieb niftybunny abuse@to-surf-and-protect.net:
Ups sorry, its in your torrc. You can modify how many relays can connect to your relay.
its in your torrc file
mine looks something like this:
SocksPort 0 # disable local usage CookieAuthentication 1 # method for controller authentication ORPort 21001 # ORPort angepasst DirPort 11001 # DirPort angepasst Nickname niftycastoroides # Solltest du auf jeden Fall anpassen ContactInfo abuse@to-surf-and-protect.net # Solltest du auf jeden Fall anpassen RelayBandwidthRate 100 MB # Bandbreite die du zur Verfügung stellst RelayBandwidthBurst 100 MB # Bandbreite die du zur Verfügung stells MaxMemInQueues 1024 MB # DDOS ExitRelay 0 # This is an Exit # ORPort [2a01:4f9:2a:98c:0000:0000:50cf:a8ba]:21001
Try to limit you men usage with MaxMemInQueues 1024 MB and your connection LimitNOFile 5000 or something like this. Its mostly try and error how much a Pie can handle. In my experience: ARM mostly suxx with AES and thats the most important part of a Tor relay. Just try different settings :)
On 9. Mar 2019, at 23:24, digitalist00 digitalist00@protonmail.com wrote:
Is this a command?
Sent with [ProtonMail](https://protonmail.com/) Secure Email.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ Am Samstag, 9. März 2019 23:22 schrieb niftybunny abuse@to-surf-and-protect.net:
Next step: try LimitNOFILE = 1000
On 9. Mar 2019, at 23:20, digitalist00 digitalist00@protonmail.com wrote:
No no: CPU is about 10 - 15 % an RAM (mem) at about 15 % too (143 MB).
Sent with [ProtonMail](https://protonmail.com/) Secure Email.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ Am Samstag, 9. März 2019 21:14 schrieb niftybunny abuse@to-surf-and-protect.net:
> What does top say? CPU 100% and/or ram full? > >> On 9. Mar 2019, at 20:14, digitalist00 digitalist00@protonmail.com wrote: >> >> Dear helpers! >> Nyx says that my relay is unresponsive and that it was resumed. As I write this mail I have already 334 duplicates hidden. >> What's my problem and how can I solve this? >> The relay runs on a Raspberry Pi and is connected via LAN. >> Yours >> Digitalist >> >> <Unbenannt.JPG> >> >> Sent with [ProtonMail](https://protonmail.com/) Secure Email. >> >> _______________________________________________ >> tor-relays mailing list >> tor-relays@lists.torproject.org >> https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
Hi,
On 10 Mar 2019, at 08:56, digitalist00 digitalist00@protonmail.com wrote:
Sorry, germin because of your torrc-example: I added MaxMemInQueues 1024 MB LimitNOFile 5000 doesn't work, neither does LimitNOFILE = 5000 and I deleted it. Nyx didn't start anymore and then I first had to "chown <authcookie-file>". Tor is running again and nyx says "Relay unresponsive - Relay resumed - 3, no 4 duplicates hidden. I have traffic, some flags and everything seems fine except those nyx-notices.
Maybe you're seeing a bug in nyx, and tor is ok?
Have you tried reading tor's logs directly? (It looks like you are reading them through nyx.)
Tor's logs should be at /var/log/tor/log , or a similar path.
T
On 3/11/19 12:22 AM, teor wrote:
Have you tried reading tor's logs directly? (It looks like you are reading them through nyx.)
Tor's logs should be at /var/log/tor/log , or a similar path.
In Raspian logs are sent to system journal, so "sudo journalctl -f -u tor.service" will show the logs, you can change the log level to "warn" or "err" by setting "Log err syslog" (syslog is set in the standard torrc delivered with the package I run on Raspian, which comes from the official repository I think).
Remark: I added sources "deb http://deb.torproject.org/torproject.org stretch main".
Regards yl
Thanks for you replies.
I did "sudo usermod -a -G debian-tor your_user_name" but I got no connection for minutes.
I had a lot of errors due to a lack of diskspace. Obvisly the logs had filled it up, so I commented the lines in the torrc that deal with logs.
Then I restarted the hole pi. Now I can't reach it via Remotedesktop, only via Putty. An in the Putty-console nyx does nothing, not even giving me an error or simply returning to the prompt.
I dont now if tor is running now, but I think that is no more my problem.
yours
digitalist
Sent with ProtonMail Secure Email.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ Am Montag, 11. März 2019 20:50 schrieb ylms tor@yl.ms:
On 3/11/19 12:22 AM, teor wrote:
Have you tried reading tor's logs directly? (It looks like you are reading them through nyx.) Tor's logs should be at /var/log/tor/log , or a similar path.
In Raspian logs are sent to system journal, so "sudo journalctl -f -u tor.service" will show the logs, you can change the log level to "warn" or "err" by setting "Log err syslog" (syslog is set in the standard torrc delivered with the package I run on Raspian, which comes from the official repository I think).
Remark: I added sources "deb http://deb.torproject.org/torproject.org stretch main".
Regards yl
tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
Hello digitalist,
On 3/11/19 9:40 PM, digitalist00 wrote:
I had a lot of errors due to a lack of diskspace. Obvisly the logs had filled it up, so I commented the lines in the torrc that deal with logs.
you may need to check in /var/log how much space the files there take up, also install (and maybe set up) logrotate. I am not sure how much space the relay cache will take up, but lately I buy Raspberry Pi's with 64 GB of Micro SD cards to avoid such problems (lazy solution).
Sorry you have this problems. yl
Hello again!
I've moved and Tor is now online again about 10 days. It is also accessible via Remote Desktop. And there are still the nyx notices saying Relay unresponsive (last heartbeat...). Sometimes every two minutes and sometimes every quarter of an hour. And I've lost the stable flag.
Yours SMichel
Sent with ProtonMail Secure Email.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ Am Montag, 11. März 2019 23:42 schrieb ylms tor@yl.ms:
Hello digitalist,
On 3/11/19 9:40 PM, digitalist00 wrote:
I had a lot of errors due to a lack of diskspace. Obvisly the logs had filled it up, so I commented the lines in the torrc that deal with logs.
you may need to check in /var/log how much space the files there take up, also install (and maybe set up) logrotate. I am not sure how much space the relay cache will take up, but lately I buy Raspberry Pi's with 64 GB of Micro SD cards to avoid such problems (lazy solution).
Sorry you have this problems. yl
tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
Hello!
I'dont know why, but the stable-flag is back again. Today I've got (until now) many times the nyx notice that my relay is unresponsive and the notice that it was resumed (with 260 duplicates hidden.
Yours SMichel
Sent with ProtonMail Secure Email.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ Am Donnerstag, 4. April 2019 19:02 schrieb digitalist00 digitalist00@protonmail.com:
Hello again!
I've moved and Tor is now online again about 10 days. It is also accessible via Remote Desktop. And there are still the nyx notices saying Relay unresponsive (last heartbeat...). Sometimes every two minutes and sometimes every quarter of an hour. And I've lost the stable flag.
Yours SMichel
Sent with ProtonMail Secure Email.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ Am Montag, 11. März 2019 23:42 schrieb ylms tor@yl.ms:
Hello digitalist, On 3/11/19 9:40 PM, digitalist00 wrote:
I had a lot of errors due to a lack of diskspace. Obvisly the logs had filled it up, so I commented the lines in the torrc that deal with logs.
you may need to check in /var/log how much space the files there take up, also install (and maybe set up) logrotate. I am not sure how much space the relay cache will take up, but lately I buy Raspberry Pi's with 64 GB of Micro SD cards to avoid such problems (lazy solution). Sorry you have this problems. yl tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
tor-relays mailing list tor-relays@lists.torproject.org https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
On 3/9/19 11:49 PM, digitalist00 wrote:
OK: chown <datei in der authcookie liegt> hat's gebracht.
Try to add the user you use to start nyx to the group tor runs with.
If you run a Debian based system it is "sudo usermod -a -G debian-tor your_user_name" to add "your_user_name" to the group "debian-tor". That should help for most problems like this.
yl
Hello digistalist,
On 3/9/19 8:14 PM, digitalist00 wrote:
Dear helpers! Nyx says that my relay is unresponsive and that it was resumed. As I write this mail I have already 334 duplicates hidden. What's my problem and how can I solve this? The relay runs on a Raspberry Pi and is connected via LAN. Yours Digitalist
One more email from my side, I moved one relay to a Raspberry Pi 3B (maybe a 3B +, don't remember) last Friday, it is running well with this config:
# my config ExitPolicy reject *:* BandwidthRate 25Mbits BandwidthBurst 40Mbits Nickname your_nickname DirPort 9030 NumCPUs 4 ControlPort 9051 ORPort 443 ClientUseIPv6 1
I throttle the bandwidth because I only have 40MBit/s upload, it is a ADSL line. :-/
yl
tor-relays@lists.torproject.org
-
digitalist00 -
niftybunny -
teor -
ylms